Radio Overview

This user guide covers the operation of the CP160 Portable Radios.

3.	Channel Selector Knob
	Used to switch the radio to different channels.
4.	LED Indicators
	Indicate radio status:
	Green: Solid during power up routine; off after

OVERVIEW

C a u t i o n

Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet 6864117B25_ enclosed with your radio.

successful power up; flashing when scanning.

Red: Solid - transmitting; Flashing when

transmitting - low battery:

Flashing - channel is busy receiving.

Yellow: Solid when radio is in monitor mode,or

is sending a selective call or call alert;

RADIO

ATTENTION!

This radio is restricted to occupational use only to satisfy ICNIRP RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet (Motorola Publication part number 6864117B25_) to ensure compliance with RF energy exposure limits.

OPERATION AND CONTROL FUNCTIONS

Radio Controls

The numbers below refer to the illustrations on the inside front cover.

1.Push-to-talk (PTT)

Press and hold down this button to talk; release it to listen.

2.On-Off / Volume Knob

Used to turn the radio on or off, and to adjust the radio’s volume.

	Flashing - receiving a selective call or call alert.
5.	Microphone/Speaker
	Hold the microphone 2.5 to 5 cm (1-2 inches)
	from your mouth, and speak clearly into it.
6.	LCD Display
	An 8 character single line display with up to 9
	radio status icons.
7.	Front Button P2 J
8.	Menu Scroll Buttons L M
9.	Front Button P1 K
10. Side Button 2
11. Side Button 1
12. Accessory Connector
	Connects remote microphones, remote
	earphones and other accessories. Replace dust
	cap when not in use.
13.	Belt Clip

3English