Trane TWE200B, TWA075A, TWA200B, TWE050A manual Table GD-1 General Data Heat Pumps

Page 9

General

 

Data

(Heat Pumps)

Table GD-1 — General Data — Heat Pumps

 

TWA075A

TWA100A

Cooling Performance1

 

 

Gross Cooling Capacity, Btu (kW)

 

 

Matched Air Handler, Btu (kW)

85,000 (24.89)

112,000 (32.79)

Heat Pump Only2, Btu (kW)

85,000 (24.89)

112,000 (32.79)

ARI Net Cooling Capacity3

83,000 (24.30)

108,000 (31.62)

System Power kW

7.91

10.27

Heat Pump Only Power kW

7.12

9.32

Heating Performance

 

 

ARI Heating with Matched Air Handler

 

 

HighTemperature Capacity, Btu (kW)

81,000 (23.72)

110,000 (32.21)

LowTemperature Capacity, Btu (kW)

49,000 (14.35)

71,000 (20.79)

Compressor

 

 

Number

1

1

Type

3D®Scroll

3D®Scroll

No. Motors

1

1

Motor HP (kW)

6.25 (4.7)

8.33 (6.21)

Motor RPM

2875

2875

ARI Sound Rating (Bels)4

8.8

8.8

System Data5

 

 

No. Refrigerant Circuits

1

1

Suction Line, in. (mm) OD

1.375 (34.9)

1.375 (34.9)

Liquid Line, in. (mm) OD

0.500 (12.7)

0.500 (12.7)

Outdoor Coil —Type

Plate Fin

Plate Fin

Tube Size, in. (mm) OD

0.375 (9.5)

0.375 (9.5)

Face Area, sq. ft (m2)

19.2 (1.78)

29.5 (2.74)

Rows

2

2

Fins Per Inch

18

18

Outdoor FanType

Propeller

Propeller

No. Used

1

1

Diameter, in. (mm)

26.00 (660.4)

28.00 (711)

DriveType

Direct

Direct

No. Speeds

1

1

CFM6, (m3/h)

4900 (8325.1)

6700 (11383.30)

No. Motors

1

1

Motor HP (kW)

0.33 (.25)

0.75 (.56)

Motor RPM

925

925

R-22 Refrigerant Charge, lb7 (kg)

18.0 (8.16)

31.5 (14.29)

Notes:

1.Cooling Performance is rated at 95°F (35°C) ambient, 80°F (26.7°C) entering dry bulb, 67°F (19.4°C) entering wet bulb and nominal cfm listed. ARI rating cfm is 350 cfm/ton for this product. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Rated accordance with ARI Standard 340/360-00.

2.Condensing Unit Only Gross Cooling Capacity rated at 45°F (7.2°C) saturated suction temperature and at 95°F (35°C) ambient.

3.ARI Net Cooling Capacity is calculated with matched blower coil and 25 ft (7.2 m) of 1.375, 0.500 OD interconnect- ing tubing. EER and/or SEER are rated at ARI conditions and in accordance with DOE test procedures. Integrated Part Load Value is based on ARI Standard 340/360-00. Units are rated at 80°F (26.7°C) ambient, 80°F (26.7°C) entering dry bulb, and 67°F (19.4°C) entering wet bulb at ARI rated cfm.

4.ARI Sound Rating is rated in accordance with ARI Standard 270 or 370.

5.System Data based on maximum linear length 80 ft (26.7 m). Maximum lift: suction 60 ft (18.3 m) liquid 60 ft (18.3 m). For greater lengths, refer to refrigerant piping applications manual.

6.Outdoor Fan cfm is rated with standard air-dry coil outdoor.

7.Refrigerant (operating) charge is for condensing unit (all circuits) with matching blower coils and 25 ft (7.6 m) of interconnecting refrigerant lines.

SSP-PRC002-EN

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Split System Heat Pumps Designing the Details Manufacturing ControlStandardized Cabinets FiltersContents Low Ambient Cooling Operation Features and BenefitsOdyssey a Complete Split System Application Considerations Clearance RequirementsBlower Rotation Cooling Capacity Selection ProcedureHeating Capacity Air Delivery SelectionModel Number Description Split System Heat Pump Model NomenclatureAir Handler Model Nomenclature General Data Heat PumpsTable GD-1 General Data Heat Pumps Table GD-2 General Data Heat Pumps Condensing Unit Power kWCondensing Unit Only 2, Btu kW Number Type 3D Scroll No. Motors Motor HP Motor RPM, kWAir Handlers Table GD-3 General Data Air HandlersTable GD-3 General Data DataSystem Performance99.3 125.2109.5 120.5Dry EnteringWet Bulb F 105 1154500 119.6 99.3161.9 115 105 Enter Dry216.2 223.9DataTWA075A ODTemp Suction ReferenceTemperature C DataTWA100ATWA100A Heat Pump Only SI TWA155B Heat Pump Only SI DataTWA155BTWA200B Heat Pump Only SI DataTWA200BOutdoor Outdoor Heating Capacity Btu/1000 AtTemperature Outdoor Heating Capacity BTUH/1000 At Indicated Indoor Dry BulbTemperature15.6 20.1DataSystem Air Handler Performance DataTable PD-13 Evaporator Fan Performance TWE050A I-P Table PD-13- Evaporator Fan Performance TWE050A SITable PD-15 Table PD-15 Evaporator Fan Performance TWE075A I-PTable PD-15 Evaporator Fan Performance TWE075A SI Table PD-16 Blower Speeds TWE075ATable PD-17 Evaporator Fan Performance TWE100A, TWE100B I-P Table PD-17Table PD 18 Blower Speeds TWE100A,TWE100B Table PD-19 Evaporator Fan Performance TWE155B SI Table PD-19 Evaporator Fan Performance TWE155B I-PTable PD-20- Blower Speeds TWE155B KW RPMTable PD-21 Table PD-21- Evaporator Fan Performance TWE200B I-PTable PD-21- Evaporator Fan Performance TWE200B SI Table PD-22 Blower Speeds TWE200BStraight 1400 Unit Louver Angle Deflection Position Model NoTWE050 1800 2200Table PD-25 Auxiliary Electric Heat Capacity Air Handler Table ED-2 UnitWiring Air Handler Table ED-1- Electrical Characteristics Motors Air HandlerTable ED-4 UnitWiring Heat Pumps Electrical DataHeater 17.3134.62 TWA050/TWE050 Jobsite ConnectionsTWA075A/TWE075A 2TWA075A/TWE155BHeat Pump Single Compressor Typical WiringHeat Pump Heat Pump Dual Compressors Typical Air Handler Air HandlerFigure DD-1 TWA075 Heat Pump DimensionalFigure DD-2 10TonTWA100A Heat Pump Dimensional DataFigure DD-3 TWA155B Heat Pump Figure DD-4 TWA200B Heat Pump Figure DD-5 TWE050AAir Handlers Figure DD-6 -TWE075A Air Handler Figure DD-7-TWE100A Air Handler Figure DD-8-TWE100B Air Handler Table DD-1 Air Handler Dimensions in. mm 905878 Figure DD-10- TWE155B Air Handler Figure DD-11 -TWE200B Air Handler Table DD-2- Air Handler Dimensions in. mm Table DD-2 Air Handler Dimensions in. mmDataAccessories Mechanical Specifications Evaporator Fan Evaporator CoilPage Page Literature Order Number Trane

TWA200B, TWA075A, TWE200B, TWE050A specifications

Trane has a long-standing reputation for manufacturing high-efficiency heating, ventilation, and air conditioning (HVAC) systems. Among their impressive lineup are the Trane TWA200B, TWE050A, TWA075A, and TWE200B models, each designed with advanced technologies that cater to various residential and commercial needs.

The Trane TWA200B is a powerful 2-ton air handler equipped with a variable-speed blower that enhances energy efficiency and provides consistent airflow. With a compact design, it fits well in tight spaces while delivering superior indoor comfort. One of its notable features is its compatibility with Trane's ComfortLink II Zoning System, allowing for customized temperature control in different zones of a building. This model is optimized for use with high-efficiency heat pumps and has enhanced filtration options that improve indoor air quality by trapping dust, pollen, and other allergens.

The TWE050A is a 5-ton packaged air conditioning unit that integrates both cooling and heating capabilities. This model is particularly praised for its high SEER (Seasonal Energy Efficiency Ratio) rating, which indicates superior energy efficiency and reduced operational costs. The TWE050A utilizes Trane's proprietary Spine Fin coil technology, which maximizes surface area for better heat exchange and overall efficiency. Its durable construction ensures long-lasting performance in various weather conditions, making it ideal for both residential and light commercial applications.

The TWA075A is a versatile 7.5-ton air handler designed for larger spaces. It features a robust construction and is equipped with a multi-speed blower that can be adjusted to meet specific airflow requirements, ensuring optimal comfort. This model is notable for its sound attenuation features, which minimize operational noise, making it suitable for quiet environments. Additionally, the TWA075A supports advanced thermostat compatibility, enabling users to maintain precise control over indoor temperatures.

Finally, the TWE200B stands out as a 20-ton packaged rooftop unit, making it an excellent choice for extensive commercial applications. Its advanced compressor technology ensures effective cooling and heating while maintaining high energy efficiency. The TWE200B includes enhanced connectivity options, allowing for remote monitoring and control through smart devices. This model also incorporates Trane's Integrated Comfort System, which streamlines operation and simplifies maintenance tasks.

Overall, the Trane TWA200B, TWE050A, TWA075A, and TWE200B models embody the company's commitment to quality, innovation, and energy efficiency, making them excellent choices for a wide array of HVAC applications.
Top Page Image Contents