Water Connections | Honeywell Gas Water Heater, 238-47969-00A

Water Connections continued-

WARNING

For protection against excessive temperatures and pressure, install temperature and pressure protective equipment required by local codes, but not less than a combination temperature and pressure relief valve certified by a nationally recognized testing laboratory that maintains periodic inspection of production of listed equipment or materials as meeting the requirements of the Standard for Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply Systems, ANSI Z21.22 and the Standard CAN1-4.4 Temperature, Pressure, Temperature and Pressure Relief Valves and Vacuum Relief Valves. The combination temperature and pressure relief valve must be marked with a maximum set pressure not to exceed the maximum working pressure of the water heater. The hourly BTU discharge capacity or the rated steam relief capacity of the combination temperature and pressure relief valve must not be less than the input rating of the water heater.

Install the combination temperature and pressure relief valve into the opening provided and marked for this purpose on the water heater.

Note: Some models may already be equipped or supplied with a combination temperature and pressure relief valve. Verify that the combination temperature and pressure relief valve complies with local codes. If the combination temperature and pressure relief valve does not comply with local codes, replace it with one that does. Follow the installation instructions above on this page.

Install a discharge line that terminates six (6) inches (15 cm) above the floor, or any distance below the structural floor, to the outlet of the combination temperature and pressure relief valve. DO NOT allow water from the discharge line to contact any live electrical part. The discharge line is to be installed to allow for complete drainage of both the combination temperature and pressure relief valve and the discharge line. The water from the discharge line must be directed to a suitable drain or area that will not be damaged by water Refer to “LOCATING THE WATER HEATER.” The discharge opening must not be subjected to blockage or freezing. DO NOT thread, plug or cap the discharge line.

It is recommended that a minimum clearance of four (4) inches (10.2 cm) be provided on the side of the water heater for servicing and maintenance of the combination temperature and pressure relief valve.

Do not place a shutoff valve between the combination temperature and pressure relief valve and the water heater, or on discharge pipes between such valves or the atmosphere.

Gas Water Heater, 238-47969-00A specifications

The Honeywell 238-47969-00A Gas Water Heater is a premium choice for those seeking efficiency and reliability in their water heating solutions. This model stands out due to its advanced technology and innovative features, making it ideal for residential and commercial applications.

One of the key attributes of the Honeywell 238-47969-00A is its high efficiency design. It utilizes a powerful gas burner system that ensures quick heating of water, reducing wait times for hot water and enhancing user convenience. The energy-efficient operation not only conserves natural resources but also translates to lower utility bills, a benefit that is increasingly important for homeowners and businesses alike.

The water heater is equipped with an advanced control system that allows precise temperature regulation. This feature ensures that the water is heated to the desired temperature without fluctuations, providing consistent performance over time. Additionally, the unit includes a high-quality thermostat that monitors the water temperature, further optimizing energy consumption and performance.

Safety is a top priority for Honeywell, and the 238-47969-00A comes with multiple built-in safety features. These include flame failure protection, which automatically turns off the gas supply in the event of a flame out, and a temperature control mechanism that prevents overheating. Such features provide peace of mind and help guard against potential hazards.

Another noteworthy characteristic of the Honeywell 238-47969-00A is its durability. Constructed with high-grade materials, including corrosion-resistant components, the water heater is designed to withstand the rigors of everyday use. This durability not only extends the lifespan of the unit but also minimizes maintenance requirements.

Installation of the Honeywell gas water heater is straightforward, thanks to its user-friendly design. It is compatible with standard gas lines and is designed for easy integration into existing plumbing systems, which reduces installation time and costs.

In conclusion, the Honeywell 238-47969-00A Gas Water Heater combines efficiency, safety, and durability in a single package. Its advanced technology and user-centric features make it a standout choice in the competitive water heating market, ensuring reliable hot water access for years to come. Whether for a home or a commercial space, this gas water heater is poised to deliver exceptional performance while maximizing energy savings.