Honeywell MK XXII, MK VIII manual System Display and Annunciation

Page 17

EGPWS LINE MAINTENANCE MANUAL

below the antenna beam scan resulting in a blank display. Alternately, under-scan, where the antennas scan is hitting the ground below the weather cells, results in ground clutter display. The calculated tilt angle is transmitted on the ARINC 429-output bus (labels 061, 062, 063, 064, and 065) for any compatible Weather Radar system. See the appropriate Part Number ICD for complete Label definitions.

2.2.14 SYSTEM DISPLAY AND ANNUNCIATION

In addition to the aural (voice) alerts provided over the cockpit speaker and interphone system, the EGPWS drives cockpit annunciators and/or Electronic Flight Instrument Systems (EFIS) with system status and alert annunciations. For some EFIS displays, the EGPWS is designed to interface and display the EGPWS terrain video as well as alert annunciations directly onto the EFIS without the use of external relays or annunciators. This is referred to as an “integrated” EFIS display. For other displays (some EFIS and all Radar Indicators), the terrain video is relay switched into the display system externally taking the place of weather radar video. In this case, external switching and annunciation is required. This is referred to as a “Bolt-On” display. The interface and display characteristics are defined for each display system and programmed into the EGPWC as part of the configuration software.

Cockpit annunciations can vary somewhat aircraft to aircraft or operator to operator. In addition, several system options are defined by the installation configuration. One of these is EGPWS lamp format. Two formats are provided; Lamp Format 1 and Lamp Format 2. They are described and illustrated in the next page.

2.2.15RUNWAY AWARENESS AND ADVISORY SYSTEM (OPTION FOR MK V AND MK VII ONLY)

The Honeywell Runway Awareness and Advisory System (RAAS) offers significant safety enhancements for aircraft equipped with Honeywell’s MK V or MK VII Enhanced Ground Proximity Warning Systems (EGPWS). Honeywell’s Runway Awareness and Advisory System is a software enhancement hosted in the EGPWS Unit. RAAS uses GPS position data and the Honeywell EGPWS Database to provide aural advisories and alerts that supplement flight crew awareness of position during ground operations and on approach to landing. EGPWS protection and operation is unaltered by the addition of RAAS. RAAS installation is accomplished via a configuration database upload. The installation does require that the EGPWS has a source of GPS data, software -218-218 (or -002 or -051) or later, Terrain Database version 435 or later (454 or later if using software -230-230 or later), and the RAAS Configuration Database (RCD) or Reloadable Customer Definitions (RCD) is loaded. When enabled, RAAS operates automatically, without any action required from the flight crew. RAAS availability can be verified by performing an EGPWS self test. See Appendix C for RAAS Maintenance Messages.

2.2.16 STABILIZED APPROACH MONITOR (OPTION FOR MK V AND MK VII ONLY)

The Stabilized Approach Monitor function offers significant safety enhancements for aircraft equipped with Honeywell’s MK V or MK VII Enhanced Ground Proximity Warning Systems (EGPWS). Honeywell’s Stabilized Approach Monitor is a software enhancement hosted in the EGPWS Unit. Stabilized Approach Monitor uses GPS position data and the Honeywell EGPWS Database to provide aural advisories and alerts that supplement flight crew awareness of unstabilized approach to landing. EGPWS protection and operation is unaltered by the addition of Stabilized Approach Monitor. Stabilized Approach Monitor installation is accomplished via a configuration database upload. The installation does require that the EGPWS has a source of GPS data, software -230-230 or later, Terrain Database version 454 or later, and the Reloadable Customer Definitions (RCD) is loaded. When enabled, Stabilized Approach Monitor operates automatically, without any action required from the flight crew. Stabilized Approach Monitor availability can be verified by performing an EGPWS self test. See Appendix D for

Stabilized Approach Monitor Maintenance Messages.

2.2.17 ALTIMETER MONITOR (OPTION FOR MK V AND MK VII ONLY)

The Altimeter Monitor function offers significant safety enhancements for aircraft equipped with Honeywell’s MK V or MK VII Enhanced Ground Proximity Warning Systems (EGPWS). Honeywell’s Altimeter Monitor is a software enhancement hosted in the EGPWS Unit. Altimeter Monitor compares Corrected Altitude to the EGPWS blended Geometric Altitude solution to provide aural advisories that supplement flight crew awareness of incorrect altimeter setting or problems with the pressure altitude system. EGPWS protection and operation is unaltered by the addition of Altimeter Monitor. Altimeter Monitor installation is accomplished via a configuration database upload. The

CAGE CODE: 97896

SCALE: NONE SIZE: A DWG NO.: 060-4199-180

REV: G

SHEET 17 of 68

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Egpws Line Maintenance Manual Drawn Description RevisionsDate ApprovedEFF PT 14A Disp USE Table of Contents Maintenance Practices 10.1 MK V Egpwc Part Numbers MK VII Egpwc Part Numbers Introduction ScopeApplicability MK VI, MK VIII, MK Reference DocumentsEnhanced Ground Proximity Warning System Description and Operation General System DescriptionMode 2A/2B Terrain Closure Rate Operation Mode 1 Excessive Descent RateMode 3 Descent After Takeoff Mode 4A/4B/4C Unsafe Terrain ClearanceCallout Description Mode 5 Descent below GlideslopeMode 6 Advisory Callouts Optional Smart Five Hundred Excessive Bank Angle Callout Mode 7 Windshear Detection Optional for MK V/VII onlyTail Strike Callout Envelope Modulation not Available in MK VI/VIIITerrain and Obstacle Database Runway DatabaseTerrain Alerting and Display Optional Weather Radar Autotilt MK V and MK VII only Peaks Display Mode OptionalGeometric Altitude GPS Required Altimeter Monitor Option for MK V and MK VII only System Display and AnnunciationStabilized Approach Monitor Option for MK V and MK VII only LOW Airspeed Monitor MK V Boeing 737NG only Long Landing Monitor Option for MK V and MK VII onlyLamp Format BelowBIT Description System Maintenance Maintenance PhilosophySystem Operation During AN Inop Condition Egpwc Front Panel Front Panel Test ConnectorEgpws Status LED’S Front Panel SELF-TEST Interface MK V and MK VII onlySELF-TEST Functions External Computer Fault Fail Corrective Action Fault Isolation Troubleshooting GeneralTroubleshooting Guide SELF-TEST Preamble Level 1 SELF-TEST GO/NO GO TestGpws INHIBITED, Terrain Inhibited Short Level 1 SELF-TESTGpws Inhibited SELF-TEST InhibitedLong Level 1 SELF-TEST Level 2 SELF-TEST Current FaultsCurrent Faults External Current Faults InternalFault Example Reason BUS Wiring Fault Bussignal FaultFlap Switch Fault Gear Switch FaultSystem or Mode Tasked Failed Program PIN Read ErrorCallouts Option Invalid Audio Menu InvalidSheet 31 Terrain Clearance Floor Position Error Terrain AWARENESS-POSITION ErrorTerrain Awareness no Valid Latitude Terrain Awareness no Valid LongitudeFollowing Information is Given in the Level 3 SELF-TEST Level 3 SELF-TEST System ConfigurationIRS 1 Attitude Mode Selected Egpws Line Maintenance Manual Following Information is Given in the Level 4 SELF-TEST Level 4 SELF-TEST Fault HistoryFollowing Information is Given in the Level 5 SELF-TEST Level 5 SELF-TEST Alert HistoryLevel 6 SELF-TEST Discrete Input Test 3 +28V Landing Gear Discrete Arinc 552 / ALT 55 Radio Altitude Validity Flag DiscretesGND Landing Gear Discrete 5 +28V Landing Flap or Flap Override Discrete GND Landing Flap Discrete or Flap OverrideSELF-TEST Discrete Flap Position DiscretesSteep Approach Discretes Steep Approach Discrete #1 MK V and MK VII onlyGND ILS Tuned Discrete Steep Approach Discrete #210 +28V ILS Tuned Discrete Glideslope Validity DiscretesGND Glideslope Inhibit Discrete GND Glideslope Cancel Discrete13 +28 V Glideslope Inhibit Discrete Decision Height DiscreteCallouts Enable Discrete MK V and MK VII only Mode 6 Volume Control DiscreteGND Audio SUPPRESSINHIBIT/ALL Modes Inhibit Discrete 19 +28 V Audio SUPPRESSINHIBIT/ALL Modes Inhibit DiscreteDisplay Select Discretes AOA Validity Discretes MK V and MK VII onlyTerrain Awareness & TCF Inhibit Simulator Reposition MK V and MK VII onlyLocalizer Validity Discretes MK V and MK VII only Weather Radar ON/OFFAttitude Validity Discretes Airspeed Validity DiscreteAcceleration SELF-TEST in Progress Discrete Barometric Altitude Rate Validity DiscretesLongitudinal Acceleration Validity Discrete Normal Acceleration Validity DiscreteMagnetic Heading Validity Discrete PLI Deselect Switch Discretes MK V and MK VII onlyAOA Vane Heater Discrete Autopilot Disconnect DiscretesAltitude Alert Discrete Tactical Select DiscreteCorrected Barometric Altitude Validity Discrete Momentary Flap Override DiscreteRaas Enable Discrete MK V and MK VII only Weight on Wheels DiscreteGpws Inhibit Discrete Raas Inhibit Discrete MK V and MK VII onlyLOW Airspeed Monitor Inhibit Discrete MK V 737NG only Database Update Maintenance Practices GeneralDatabase Update Frequency Loading a DatabaseObtaining AN Egpws Flight History Download Card Download ProcedureFlight History Downloading Via email aerotechsupport@honeywell.com Transcription of the Pcmcia CardSheet 54 CFG CAT 7 92 T CUW command/data string Installation REMOVAL/INSTALLATION 6.1 Egpwc RemovalConfiguration Module MK VI, MK VIII, and MK Xxii only Servicing GeneralEgpws Ground Tests Display Switching Relays if InstalledADJUSTMENT/TEST Adjustment Repairs General CLEANING/PAINTING GeneralINSPECTION/CHECK General Appendix a Winviews Appendix B Troubleshooting DO’S and do NOT’S Maint Function Message Appendix C Raas Maintenance Messages Aural & DisplayedRAAS-NA-xxxx amber RAAS-RTO green RAAS-INOP amber Maint Function Displayed MessageSelf-Test Level 3 RCD Part Number Appendix D Stabilized Approach Monitor Maintenance MessagesAppendix E Altimeter Monitor Maintenance Messages Self-Test Level 1 Flaps Monitor Inop Appendix G Long Landing Monitor Maintenance Messages Self-Test Level 3 Airspeed Low Inhibited Annunciated at Appendix H LOW Airspeed Monitor Maintenance Messages

MK VIII, MK V, MK XXII, MK VII, MK VI specifications

Honeywell's range of control systems, particularly the MK VI, MK VIII, MK VII, V, and XXII, are pivotal innovations that have revolutionized process automation and control in various industries, especially in power generation and oil and gas sectors. Each of these systems comes with unique features and technologies to enhance operational efficiency, safety, and reliability.

The Honeywell MK VI control system is renowned for its ability to provide effective plant control and management tools, featuring advanced operator interfaces and robust hardware components. It employs a modular design, which allows for easy scalability and integration into existing infrastructure. The MK VI is equipped with Ethernet-based communication protocols, ensuring high-speed data transfer and enabling seamless connectivity with other systems.

The MK VIII system takes automation a step further, emphasizing enhanced performance and reliability. With its built-in redundancy and advanced diagnostics, the MK VIII minimizes downtime and optimizes maintenance efforts. Its powerful software tools are designed to improve operator decision-making, providing critical insights into plant operations and trends.

Honeywell’s MK VII control system is designed for high-performance applications, especially in gas turbine environments. It features advanced control algorithms, enabling precise control of emissions and improving overall efficiency. The MK VII stands out with its ability to maintain optimal performance under varying load conditions, ensuring reliability in challenging operational scenarios.

The MK V system is one of Honeywell's legacy products, known for its simple and user-friendly interface. Despite its age, it continues to be a dependable choice for many plants. It offers solid performance with basic control functions and has been a reliable backbone for older facilities transitioning into newer technologies.

Lastly, the MK XXII brings a modern twist to control systems with its focus on cybersecurity and data analytics. This system takes advantage of big data and IoT technologies, providing enhanced visibility of operations through real-time monitoring and predictive maintenance capabilities. The MK XXII ensures that plants not only operate efficiently but also mitigate risks associated with cyber threats.

Overall, Honeywell's series of control systems showcases their commitment to innovation and reliability in process automation, catering to the diverse needs of contemporary industrial environments. Each system is designed with specific features and capabilities that address the evolving challenges of process control, ensuring that users can achieve optimal performance and safety in their operations.
Top Page Image Contents