Other Features | State Industries GPO75 455, GPO75 385 instruction

C O M M E R C I A L

TITAN™

Commercial Oil Water Heater

Meets or Exceeds the Thermal Efficiency and/or Standby Loss

Requirements of the U.S. Department of Energy and Current

Edition of ASHRAE/IESNA 90.1

Titan™ Models Inhibit Lime and Sediment Buildup –

Titan™models are warranted against tank failure due to sediment buildup for three years.

Glass-Lined Tank – Assures years of rust-free clean hot water. 160 psi working pressure.

180° Adjustable Thermostat – Has upper and lower sensing bulbs to average water temperatures at top and bottom of heater for maximum temperature control (120°-180°).

Safety Shutoff – Limits temperature buildup.

UL Listed Oil Burner – Precision engineered to match the units they are used with; designed to ﬁre 1.75 to 5.0 gallons of oil per hour. All models equipped with single phase continuous duty motor 120 volt AC 60 Hz, 3450 rpm with overload switch and interrupted ignition. Standard burners equipped with single stage pump with 1 or 2 line capability. Flame retention principle assures high rate of combustion efﬁciency, yet maintains low operating noise levels. Fuel unit includes pump, strainer, pressure regulating valve and ignition transformer. Transformer rated at 120 volt AC, 60 Hz with high voltage secondary, UL listed for use with No. 1 and 2 commercial grade fuel oil. Burner mounted cadmium cell relay for ﬂame detection - 15 second safety switch timing eliminates the need for RA890F Electronic Safeguard. Complies with UL 296-MP 1192.

Efﬁcient Combustion Chamber – Precast, high temperature combustion chamber made of alumina silica ceramic ﬁber. Engineered for maximum insulation and heat reﬂection. Unique design assures more complete combustion by stabilizing ﬂame pattern.

Interrupted Ignition – Reduces electrical consumption.

Oil Solenoid Safety Valve – Standard on GPO75 385, GPO75 455 and GPO69 700.

3/4” Drain Valve – Provided in lower tank for fast draining.

Two Hand-Hole Cleanouts – Allows easy cleaning on standard models GPO75 385 and larger and ASME models.

Anodic Protection – For longer tank life.

Flame Observation Port – Permits convenient ﬂame check.

Foam Insulation – Saves fuel, helps assure constant temperature, vermin proof.

Jacket – Heavy gauge steel with baked enamel ﬁnish over bonderized undercoat. Not approved for installation on combustible ﬂooring.

Easy To Install Burner – Three bolt mounting of burner assures easy installation.

Barometric Draft Regulator

CSA Certified and ASME Rated T&P Relief Valve

CAUTION: Units must be installed on non-combustible surface.

Limited Warranty:

Limited Warranty Outline

–If the tank should leak any time during the ﬁrst three years, under the terms of the warranty, State Water Heaters will furnish a replacement heater; installation,

labor, handling and local delivery extra.

–NOTE: This Outline Is NOT A Warranty. For complete information, consult the written warranty or State Water Heaters.

Other Features:

–Two layers of high temperature ceramic ﬁber insulation in combustion chamber

–Flame inspection port opening

–Mounted on rugged channel iron skids

–Multiple anodes for protection

Optional Features:

–Two Stage Pump – For use with underground oil storage tanks.

–ASME Construction – Available on models GPO84 315, GPO75 385, GPO75 455, GPO69 700. ASME units have 160 psi working pressure.

For more information on Titan™ contact: State Water Heaters

500 Tennessee Waltz Parkway, Ashland City, TN 37015

800-365-0024 Toll-free USA www.statewaterheaters.com

SCOSS00105

July 2008R

GPO69 700, GPO75 455, GPO75 385, GPO84 315 specifications

State Industries has established itself as a leader in the water heater manufacturing industry, offering a diverse range of high-quality products. Among their innovative offerings are the GPO69 700, GPO75 385, GPO75 455, and GPO84 315 water heaters. Each model brings its own set of features, technologies, and characteristics, ensuring that consumers have options tailored to various needs.

The GPO69 700 is a gas water heater designed for residential use, featuring a capacity of 69 gallons. This model is equipped with a high-efficiency burner, providing rapid heating while maintaining energy savings. The state-of-the-art insulation minimizes heat loss, ensuring that the water stays hot for longer periods. Additionally, an advanced electronic ignition system eliminates the need for a pilot light, enhancing safety and reliability.

Next in line is the GPO75 385, which boasts a slightly larger capacity of 75 gallons. This unit is particularly noted for its exceptional energy efficiency ratings, making it an ideal choice for households with higher hot water demands. The GPO75 385 utilizes a two-inch insulation blanket, reducing standby heat loss significantly. Its user-friendly temperature control and diagnostic features also make it an excellent option for those seeking ease of operation.

The GPO75 455 model continues the trend of high capacity and efficiency, featuring a 75-gallon tank as well. It is engineered with a focus on durability and long-term performance. The heavy-duty anode rod helps prevent corrosion, extending the lifespan of the unit. In addition, the GPO75 455 is designed with an easy accessibility feature, allowing for seamless maintenance and efficient troubleshooting.

Lastly, the GPO84 315 rounds out this lineup with an impressive capacity of 84 gallons. This model is tailored for larger families or commercial applications, providing ample hot water supply on demand. It is fortified with a powerful burner that ensures rapid heating capabilities, coupled with advanced thermostatic controls for precise temperature management. The GPO84 315 also features enhanced energy efficiency certifications, making it a sustainable choice for eco-conscious consumers.

In conclusion, State Industries offers a robust selection of water heaters with the GPO69 700, GPO75 385, GPO75 455, and GPO84 315 models. Each product is designed to meet specific consumer needs while incorporating advanced technologies and features that ensure reliability, efficiency, and ease of use. Whether for residential or larger commercial applications, State Industries continues to lead the way in water heating solutions.