Honeywell 16 Plus manual Quick Operation Guide

QUICK OPERATION GUIDE

Enter your user code then select

ASET (an Unset system)

BPART SET (Defaults to Parts 1 and 2)

1 key • toggles the Set (ON)/Unset (OFF) status of Part 1 2 key • toggles the Set (ON)/Unset (OFF) status of Part 2 3 key • toggles the Set (ON)/Unset (OFF) status of Part 3

ent UNSET (a Set system)

1OMIT ZONES

A or B key to view zones

#to change omit status of zone (must be an omittable zone) ent key to accept programming and start setting

esc key to accept programming without setting

2CHIME ZONES

A or B key to view zones

#key to enable/disable chime function on zone

ent key to accept esc key to cancel

3WALK TEST

A or B key to view zones

#key to enable/disable Walk Test function on zone ent key to start Walk Test

#key to toggle display between open and tested zones esc key to end Walk Test

Note: Zones number 10 to 16 will be displayed as A to G

4(ASSIGNING) USER CODES A or B key to select user (1 – 14) ent key to program code

number keys to enter digits, ¸ key to delete digits ent key to accept programming, esc to cancel

5TEST OUTPUTS

A or B key to select output for test

#key to enable/disable test function on zone

esc key to end test

9LOG

A key to step forwards through events B key to step backwards through events

# key to display event date

esc key to exit Log

ent+B TIME

To access the Time option, enter your user code, press the ent key, the B key and then the ent key.

Then press the:

•1 key to select Time (hh/mm)

•2 key to select Date (dd/mm/yy)

•3 key to select Start Summer (dd/mm)

•4 key to select End Summer (dd/mm).

Press the ent key to accept the programming for each option, or the esc key to cancel.

vii