Honeywell 4110XM manual Trouble Conditions, Check and Battery Displays, Power Failure

Page 27

Trouble Conditions

"Check" and "Battery" Displays

The word CHECK on the keypad's display, accompanied by a "beeping" at the keypad, indicates a trouble condition in the system.

To silence the beeping for these conditions, press any key.

1.A display of "CHECK" and one or more zone numbers indicates that a problem exists with the displayed zone(s) and requires your attention. If the CHECK display relates to a fire zone, CALL FOR SERVICE IMMEDIATELY.

2.Determine if the zone(s) displayed are intact and make them so if they are not. If the problem has been corrected, the display can be cleared if you enter the OFF sequence (user code plus OFF key) twice. If the display persists, CALL FOR SERVICE IMMEDIATELY.

TYPICAL "CHECK" DISPLAY

03 AC

CHECK

FIXED-WORD

3.A display of "BAT" with no zone number or beeping indicates that the main standby battery in your control is weak. If this condition persists for more than one day (with AC present), CALL FOR SERVICE.

Power Failure

If there is no keypad display at all, and the POWER indicator (if present) is not lit, operating power for the system has stopped and the system is inoperative.

CALL FOR SERVICE IMMEDIATELY.

If the message "AC LOSS" or "NO AC" is displayed, and the POWER indicator (if present) is off, the Keypad is operating on battery power only. If only some lights are out on the premises, check circuit breakers and fuses and reset or replace as necessary. CALL FOR SERVICE IMMEDIATELY if AC power cannot be restored.

– 27 –

Image 27

Contents Ademco 4110XM Proper Intrusion Protection About This ManualTable of Contents Table of Contents Keypads AlarmsSystem Overview GeneralBurglary Protection Memory of AlarmSystem Overview cont’d Fire ProtectionKeypad Styles About the KeypadSummary of System Status Displays About the Keypad cont’dSummary of Keypad Functions Keypad FunctionsEmergency Keys Keypad Functions cont’dSecurity Codes Duress CodeQuick Arming Assigning, Changing, or Deleting User Codes Security Codes cont’dGeneral Information Entry/Exit DelaysChecking for Open Zones Using Ready KeyArming the System Using Stay Key Arms Perimeter Only, Entry Delay OnArming the System cont’d Using Instant Key Arms Perimeter Only, Entry Delay OffUsing Away Key Arms Entire System, Entry Delay On Using Maximum Key Arms Entire System, Entry Delay OFF To Disarm the System Disarming and Silencing AlarmsUsing OFF Key To Silence a Burglary AlarmBypassing Protection Zones Using Bypass KeyQuick Bypass Bypassing Protection Zones cont’dArming Using the KeyswitchUsing Chime Key Chime ModePanic Keys Using Panic KeysTypical Keypad Panic Keys cont’dUsing Test Key Testing the SystemCheck and Battery Displays Power FailureTrouble Conditions Other Displays Trouble Conditions cont’dFire Alarm System If InstalledCase Of Fire Alarm Silencing Fire Alarms Fire Alarm System cont’dDining Emergency Evacuation Quick Guide to Basic System Functions Function Procedure CommentsSound Cause Display Summary of Audible/Visual NotificationProtection Zones List Ademco 4110XM Owners Insurance Premium Credit RequestCredit Request Owners Insurance PremiumFCC / IC Statement Regulatory Statements and WarningsTELEPHONE/MODEM Interface Regulatory Statements and Warnings cont’dEvent of Telephone Operational Problems Limitations of this System Servicing Information TWO Year Limited Warranty Page Page Page Page ÊN5100V5BŠ