Honeywell 4110XM manual Summary of Audible/Visual Notification, Sound Cause Display

Page 34

Summary of Audible/Visual Notification

SOUND	CAUSE	DISPLAY
LOUD, INTERRUPTED†	FIRE ALARM	FIRE and ALARM are displayed; protection zone in alarm
Keypad & External		is displayed.
LOUD, CONTINUOUS†	BURGLARY/AUDIBLE	ALARM is displayed; protection zone in alarm is also
Keypad & External	EMERGENCY ALARM	displayed.
ONE SHORT BEEP	a. SYSTEM DISARM	a. Only READY is displayed. Green READY indicator (if
(not repeated)		present) is lit.
Keypad only	b. SYSTEM ARMING ATTEMPT	b. NOT READY is displayed, open protection zone number
	WITH AN OPEN ZONE	is displayed.
		Green READY indicator (if present) is not lit.
	c. BYPASS VERIFY	c. The bypassed protection zone numbers are displayed.
	c. BYPASS VERIFY	(One beep for each number displayed.) BYPASS
		(One beep for each number displayed.) BYPASS
		displayed.
ONE SHORT BEEP	SYSTEM IS IN TEST MODE	Opened Zone identifications will appear.
(once every 40 seconds)
Keypad only
ONE BEEP every 40 sec.	TROUBLE	CHECK displayed. Troubled protection zone is displayed.
Keypad only
TWO SHORT BEEPS	ARM AWAY OR MAXIMUM	AWAY and (if MAXIMUM) INSTANT are displayed.
Keypad only
THREE SHORT BEEPS	a. ARM STAY OR INSTANT	a. STAY and (if INSTANT) INSTANT are displayed. Red
Keypad only		ARMED indicator is lit.
	b. ZONE OPENED WHILE SYS-	b. CHIME displayed. Pressing / READY key will display
	TEM IS IN CHIME MODE	opened zone.
	c. ZONE OPENED WHILE SYS-	c. Open protection zone number is displayed.
	TEM IS IN TEST MODE

RAPID BEEPING	MEMORY OF ALARM	FIRE and/or ALARM is displayed; zone in alarm is
Keypad only		displayed.

SLOW BEEPING	ENTRY DELAY WARNING	None during delay; Exceeding the delay time without
Keypad only		disarming causes alarm.

†If bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.

Notes: • BAT displayed (with no beeping or zone number) indicates system main battery is weak see “Check” and “Battery” Displays under TROUBLE CONDITIONS

•Also see Power Failure, and Other Displays under TROUBLE CONDITIONS.

–34 –

Image 34

Contents Ademco 4110XM About This Manual Proper Intrusion ProtectionTable of Contents Table of Contents General AlarmsSystem Overview KeypadsFire Protection Memory of AlarmSystem Overview cont’d Burglary ProtectionAbout the Keypad Keypad StylesAbout the Keypad cont’d Summary of System Status DisplaysKeypad Functions Summary of Keypad FunctionsKeypad Functions cont’d Emergency KeysDuress Code Security CodesQuick Arming Security Codes cont’d Assigning, Changing, or Deleting User CodesEntry/Exit Delays General InformationUsing Ready Key Checking for Open ZonesUsing Stay Key Arms Perimeter Only, Entry Delay On Arming the SystemUsing Instant Key Arms Perimeter Only, Entry Delay Off Arming the System cont’dUsing Away Key Arms Entire System, Entry Delay On Using Maximum Key Arms Entire System, Entry Delay OFF To Silence a Burglary Alarm Disarming and Silencing AlarmsUsing OFF Key To Disarm the SystemUsing Bypass Key Bypassing Protection ZonesBypassing Protection Zones cont’d Quick BypassUsing the Keyswitch ArmingChime Mode Using Chime KeyUsing Panic Keys Panic KeysPanic Keys cont’d Typical KeypadTesting the System Using Test KeyPower Failure Check and Battery DisplaysTrouble Conditions Trouble Conditions cont’d Other DisplaysIf Installed Fire Alarm SystemCase Of Fire Alarm Fire Alarm System cont’d Silencing Fire AlarmsDining Emergency Evacuation Function Procedure Comments Quick Guide to Basic System FunctionsSummary of Audible/Visual Notification Sound Cause DisplayProtection Zones List Owners Insurance Premium Credit Request Ademco 4110XMOwners Insurance Premium Credit RequestRegulatory Statements and Warnings FCC / IC StatementRegulatory Statements and Warnings cont’d TELEPHONE/MODEM InterfaceEvent of Telephone Operational Problems Limitations of this System Servicing Information TWO Year Limited Warranty Page Page Page Page ÊN5100V5BŠ