Note: The Disk Drive Status Indicator LEDs are active only when a RAID board is installed.
Front Disk Drive Status Indicator LEDs
LED | Status | Description | Response |
Disk Drive Activity | Off | Not accessing disk drive | None required (normal) |
| ON (Green) | Accessing disk drive | None required (normal) |
|
|
|
|
Disk Drive Status | Off | No alarms | None required (normal) |
| ON (Amber) | (See the "Disk Drive Status Conditions" |
|
|
| table that follows.) |
|
|
|
|
|
| Disk Drive Status Conditions |
|
|
Condition | LED |
|
|
No Error | Off |
|
|
Faulty or Rebuild Stopped | Steady ON |
|
|
Rebuild | Slow Blink for approximately one second |
|
|
Identify | Fast Blink for approximately three seconds |
|
|
Predicted Fault | Four fast blinks, pause (repeats) |
|
|
Hot Spare | Two fast blinks, pause (repeats) |
|
|
LAN Status Indicator LEDs (I/O Panel)
LED | Status | When On | When Blinking | When Off |
LAN Link Status | Green | N/A | Linked to network, | N/A |
|
|
| sending or |
|
|
|
| receiving data |
|
|
|
|
|
|
LAN Speed Status | Orange | 100 Mbps network | None | 10 Mbps network |
|
| connection |
| connection |
|
|
|
|
|
