Sensor Type Codes
The Sensor Type Code Table provides information regarding:
nThe type of sensor generating the SEL entry
nThe name of the sensor
nThe microcontroller which initiated the SEL entry
nThe warning or error which initiated the SEL entry.
Using the Sensor Type Code Table
Compare the Sensor Type and Number message shown in the SEL viewer display (above) to the Sensor Type/Number in Verbose column in the table below. Using information in the Sensor Name column in the table you can determine the physical component which generated the SEL message. The Generator ID column in the table identifies the microcontroller which reported the event to the SEL. Detailed information regarding the event is available from the Event Description column in the SEL Viewer.
For example, if there is a Fan #10 entry in the Sensor Type and Number column of the SEL Viewer, by looking at the Sensor type Codes table you can determine that the Baseboard Fan 1 caused this entry. The entry was reported through the Baseboard Management Controller (BMC) on the system board.
Sensor Type Codes
Sensor Type and Number in |
|
|
Verbose | Sensor Name | Generator ID |
|
|
|
Reserved | 00h | BMC |
|
|
|
Temperature #17 | Processor1 Temp | BMC |
|
|
|
Temperature #18 | Processor2 Temp* | BMC |
|
|
|
Temperature #19 | Baseboard Temp1 | BMC |
|
|
|
Temperature #1A | Baseboard Temp2 | BMC |
|
|
|
Voltage # 01 | Baseboard 5V | BMC |
|
|
|
Voltage # 02 | Baseboard 3.3V | BMC |
|
|
|
Voltage # 03 | Primary Processor | BMC |
|
|
|
Voltage # 04 | Secondary Processor* | BMC |
|
|
|
Voltage # 05 | Processor 2.5V | BMC |
|
|
|
*Not applicable to all servers |
|
|
