Connecting the Power Cord(s)
Plug the female end of the AC power cord into the input receptacle on the rear of the power supply cage. Plug the male end of the power cord into NEMA 5- 15R outlet for
If the power cord(s) supplied with the system is not compatible with the AC wall outlet in your region, obtain a suitable power cord that meets the following criteria.
nThe power cord must be rated for the available AC voltage and have a current rating that is at least 125% of the current rating of the system.
nThe power cord connector that plugs into the wall outlet must be terminated in a
nThe power cord connector that plugs into the system must be an IEC- type
nThe power cord must be less than 1.8 meters (6.0 feet) long.
WARNING
Your system shipped with a power cord for each power supply. Do not attempt to modify or use the supplied AC power cord if it is not the exact type required.
CAUTION
When two power supplies are installed in the system the power plug from each of the power supplies must be plugged into the same common ground power outlets.
