Symbios Configuration Utility | NEC LC1400 manual

Symbios Configuration Utility

The Symbios Configuration Utility detects the two SCSI host adapters located on the system board. Use the utility to:

nChange adapter and SCSI device default values

nCheck and/or change SCSI device settings that may conflict with those of other devices in the server.

nPerform low-level formatting or verify operations on SCSI disk drives.

Running the Symbios Configuration Utility

1.Power-on the system. The system boots up.

2.When this message appears on the video monitor: Press Ctrl-C to start the Symbios Configuration Utility Press Ctrl+C to run this utility.

3.The utility starts and the Main Menu displays.

Symbios Configuration Utility Main Menu

Adapter	Port	IRQ Level		Status	NVRAM
	Number				Found
	Number		Current	Next Boot	Found
			Current	Next Boot

SYM53C875	F800	11	On	On*	Yes

SYM53C875	F400	10	On	On*	Yes

Change Adapter Status – Press ENTER twice to change adapter Next Boot Status.

Adapter Boot Order – Press ENTER to select and change boot order of each SCSI adapter.

Additional Adapter Configuration – Not used.

Display Mode-Verbose – Press ENTER to change display mode.

Mono/Color – Press ENTER to change display from black/white to color.

Language – Not used.

Help/Quit

*Next Boot Status for this controller must be turned OFF if you install the optional Mylex AcceleRAID™ 150 (SecuRAID 110) or Mylex AcceleRAID™ 250 (SecuRAID 210) Controller board in your system. Refer to “Change Adapter Status” above.

3-18 Configuring Your System

Image 70

NEC LC1400 manual Running the Symbios Configuration Utility, Symbios Configuration Utility Main Menu

Contents

Server LC1400 Page Server LC1400 Page Page Page Using Your NEC Versa Users Guide Proprietary Notice and Liability Disclaimer Contents Configuring Your System Iv Contents Problem Solving Vi Contents System Cabling System Status Hardware Support Information Using This Guide Using This Guide Viii Using This Guide Text Conventions Related Documents System Release Notes Safety Notices Safety Notices for Users Outside of the U.S.A. and Canada Xii Using This Guide Care and Handling System Overview Overview System Overview System Overview System Overview System Chassis System Chassis Left Side View System Chassis Right Side View Peripheral Bays Power SupplySAF-TE Board System Board Features System Board Pentium II Processor System Memory Expansion Slots IDE Controller Real-Time Clock/CalendarNetwork Controller Scsi Controller Video Controller System Board Management Controller BMC External Device ConnectorsPeripheral Controller Serial Ports System Security Software Locks via the System Setup UtilitySecurity with Mechanical Locks and Monitoring Page Setting Up the System Setting Up the System Selecting a Site Unpacking the System Static Precautions Rack-Mount Subsystem AssemblyBefore You Begin Assembly Assembling the Support Brackets in the Rack Cabinet Installing the Rack-Mount Server Unit into the Rack Cabinet Getting Familiar with the System Front FeaturesFront View with Front Door Closed Opening the Front Door Setting Up the System Front View with Front Door Opened Front System Features and Controls Rear Features and Controls Rear View Power Supply Status Indicator LEDs Rear Panel Status Indicator LED DescriptionsFront System Status Indicator LEDs Status Description Response Status When On When Blinking When Off Front Disk Drive Status Indicator LEDsLAN Status Indicator LEDs I/O Panel Disk Drive Status Conditions Making Connections Setting the Line Voltage Setting the Line Voltage Connecting the Power Cords Powering On Your System Configuring Your System Configuring Your System Configuring Your System Using the Bios Setup Utility Bios Setup UtilityMenu Use Bios Setup Configuration Settings Key Function in Setup Menu Main Menu Primary/Secondary IDE Master and Slave Submenu Auto Off Advanced MenuKeyboard Submenu 30/sec PCI Device, Slot 1 Slot 7 Submenus PCI Configuration SubmenusPCI Configuration Submenu PCI Device, Slot 1 Slot 7 Submenu 2F8 Integrated Peripheral Configuration Submenu3F8 378 Security Menu Security MenuAdvanced Chipset Control 64Mb User Normal Server Menu …Z, 0 System Management SubmenuDirect Connect Server Management Information Submenu Server Management Information SubmenuConsole Redirection Submenu None Boot Device Priority Submenu Boot MenuBoot Device Priority Submenu Boot Priority Device Description Your Setting Hard Drive Submenu Hard Drive SubmenuRemovable Devices Removable Devices Submenu Exit Menu Exit MenuChoices Description Symbios Configuration Utility Main Menu Symbios Configuration UtilityRunning the Symbios Configuration Utility Number Found Current Next Boot Your Configuration Changing the Adapter and Device ConfigurationsAdapter Setup Screen Description Recommended Setting or SYM53C875 Display Only SYM53C875 Adapter 1 Scsi Hard Disk Drives SYM53C875 Adapter 2 Scsi Removable Media Devices Number RAID Level Hard Drives Description Configured Array Factory Installed ControllersRAID Configurations Optional RAID Controllers Daccf Configuration Utility Add-on Controller Configuring System Board Jumpers System Board Jumpers System Board Jumper Summary 10, Protect Moving System Board Jumpers Recovering the Bios Resetting the Cmos NvramClearing and Changing the Passwords Boot Block Write Protect BMC Forced Update Mode Upgrading Your System General Information Static PrecautionsUpgrading Your System Equipment Log Preparing Your System for UpgradeOpening the Front Door Removing a Side Panel Installing a Side Panel Removing a System Side Panel Replacing the Real-time Clock Battery Modifying the System Board Replacing the Real-Time Clock Battery Replacing the Pentium II Processor Replacing the Secc Version Processor Heat Sink Assembly Upgrading Your SystemRemoving a Processor Upgrading Your System Replacing the Sepp Version Upgrading Your System Replacing the SECC2 Version Upgrading Your System DIMMs Dimm Locations Upgrading Your System Memory Dimm Configurations System Memory Configurations Installing DIMMs Inserting Memory DIMMs Removing DIMMs Option Boards Installation ConsiderationsPCI and ISA Slot Locations Installing an Option Board Removing the Expansion Slot Cover Installing an Option Board Installing a RAID Controller Board Removing an Option Board Hard Disk Scsi Address Assignments Hard Disk DrivesScsi Disk Drive Bay Locations Bay Device Scsi ID Address Installing or Swapping a Hard Disk Drive in a Hot-swap Bay Removing the Disk Carriers Front Panel Installing or Swapping a Hard Disk DriveAssembling the Disk Carrier Securing the Drive in the Carrier Upgrading Your System Installing a Disk Carrier into the Bay Removable Media Devices Installing a 5.25-Inch Media Device Removing the Front System Bezel Removing an EMI Metal Shield Upgrading Your System Removing a Filler Panel Installing a Removable Media Device Upgrading Your System Attaching the Device Side Rails Installing the Front System Bezel Upgrading Your System Removing a 5.25-Inch Device Removing the Front System Bezel Upgrading Your System Removing a Removable Media Device Problem Solving Problem Solving Problem Solving Troubleshooting Checklists Initial System Startup Running New Application Software After System Has Been Running Correctly Additional Troubleshooting Procedures Preparing the System for Diagnostic Testing Monitoring Post Confirming Loading of the Operating System Verifying Proper Operation of Key System IndicatorsPost Keys and Errors Action/Message Description Specific Problems and Corrective Actions Power LED Does Not Light Incorrect or No Beep Code No Characters Appear on Screen System Cooling Fans Do Not Rotate Characters are Distorted or IncorrectDiskette Drive Activity LED Does Not Light Press F2 Key to Enter Setup Prompt Does Not Display Problems with Application SoftwareCD-ROM Drive Activity Light Does Not Light Enable F2 Prompt by Using SSU Bootable CD-ROM Is Not Detected Enable F2 Prompt by Changing a Jumper and Using SSU Problems with the Network Bios User’s Information PNP Installation TipsError and Status Messages Bios Messages Message Description Setup Message Description Video Bios is successfully copied to shadow RAM Post Error Codes and Messages Post Error Codes and Messages Code Error Message Problem Solving System Cabling Before You Begin System CablingSystem Cabling Standard Configuration System Cabling A-3 Standard System Cable Configuration System Cabling A-5 RAID Configuration System Cabling A-7 RAID System Cable Routing System Setup Utility System Setup Utility SSU System Setup Utility System Setup Utility B-3 Creating SSU Diskettes System Setup Utility Main Menu Window Running the SSU System Setup Utility B-5 Customizing the SSU Launching a Task Resource Configuration Add-in RCA Window System Setup Utility B-7 Defining an ISA Card RCA Window Adding and Removing ISA Cards To add an ISA card Configuration Window System Setup Utility Modifying Resources Recommended Resource Settings System Setup Utility B-11 System Resource Usage Window System Setup Utility System Resource Usage Password Administration PWA Window Multiboot Add-in MBA WindowSystem Setup Utility B-13 System Event Log SEL Window Screen Choice Description System Setup Utility B-15 Exiting the SSU System Setup Utility Emergency Management Port Managed Server Emergency Management PortEmergency Management Port Console Modem Connection How the EMP Works Emergency Management Port Console C-3 EMP Access Modes Server Configured for Console Redirect Mode Server is powered off During Post After OS boots EMP Access Modes Server not Configured for Console Redirect EMP Requirements and ConfigurationsEmergency Management Port Console C-5 Setting Up the Server for the EMP System Management Submenu Toolbar Main EMP WindowConsole Redirection Submenu Emergency Management Port Console C-7 Status Bar EMP Main Menu Connect Server Control OperationsEmergency Management Port Console C-9 Power On/Off Reset Emergency Management Port Console C-11 Phonebook SEL Viewer Management Plug-insEmergency Management Port Console C-13 SEL Viewer Menu Options Connect View Sensor Type Codes Using the Sensor Type Code TableSensor Type Codes Emergency Management Port Console C-15 Refer to Problem Solving Post System Event Logging Format Table SDR ViewerEmergency Management Port Console C-17 FRU Viewer SDR Viewer Menu Options FRU Viewer Menu Options Emergency Management Port Console C-19 Emergency Management Port Console System Status Hardware Support Information Monitor Matrix System Status Hardware Support InformationSoftware Monitoring Components/Hardware System Status Items System Status Hardware Support Information Glossary Glossary Process of loading the operating system into memory Central Processing Unit See microprocessor See EMS Bytes. See also byte 048,576 bytes. See also byte Nvram Power-On-Self-Test Type of storage device using magnetic tape Glossary Equipment Log Equipment Log Equipment Log Index Index-1 SCU Index-2Page 102177