Replacing the SEPP Version
1.Power off the system and remove the left side panel as described earlier in this chapter.
2.Pull the processor latches, Item A in Figure "Removing a Processor" below, out away from the edges of the SEPP to free them from the Universal Retention Module (URM).
3.Lift the SEP processor upward, out of the URM and place it on a grounded,
Removing a Processor
4.Remove the attachment clip, Item A in Figure "Processor Heat Sink Assembly" below, that secures the heat sink to the old processor.
5.Remove the heat sink, Item C in Figure "Processor Heat Sink Assembly" from the front of the old processor, Item B in Figure "Processor Heat Sink Assembly" below.
6.Put the old processor in a piece of conductive foam and store in an antistatic package.
