Sherbourn Technologies PT-7010A OSD Menus, The On-ScreenDisplay OSD Functions, TRIM Menu

so do not move the remotes during this time. The remote will flash “GOOD” if it has successfully learned all the commands. If it flashes “FAIL,” then repeat this procedure. 6) Press MAIN to return to the main menu.

OSD Menus

The first menu of the On Screen Display (OSD) has the following items listed. TRIMS, MODES, TONE, INPUTS, SETTINGS, and an EXIT option to quit programming. Press MENU on the Sherbourn remote to bring up the first OSD menu screen.

The On-Screen Display (OSD) Functions

Video Connections

The On Screen Display (OSD) function is present at the MAIN Composite Video, S-Video, or Component Video outputs. It is also present at the output labeled VID2/ MON2, but only if it is set to MON2 in the programming steps using the OSD. Make sure that your TV monitor’s video input is connected correctly to one of these outputs.

OSD Activation

The OSD is activated using the remote’s MENU button (with the remote set to operate the 7010A function). The joystick pad and surrounding buttons allow you to navigate through the OSD menus to control and customize many features of the PT-7010A.

Press EXIT to quit the OSD at any time. Any changes you make will be saved.

Note that the PT-7010A front panel display shows abbreviated text when the OSD is activated.

Quick Access to Information

Pressing INFO at any time will bring up a short description of the source you are listening to.

For example if you are listening to a DVD, the TV display might show:

DVD DIGITAL 48K

DTS 5.1 / 5.1

What this means is that DVD is the selected input and the signal type is DIGITAL. The sample rate of the signal is 48kHz and the decoding mode is registered as DTS mode,

5.1is the input format, 5.1 is the output (i.e. five speakers and a subwoofer).

How to Navigate the OSD Menus

Select any one of the options using the joystick pad UP and DOWN to navigate through the menu choices. Once you make a choice, a FORWARD arrow after text on the screen, shows there is more information on another page. A BACK arrow shows that you can return to the previous page. When applicable, a DOWN arrow, such as at the bottom of the Inputs Menu, shows there is a second page of similar choices. In these circumstances, the UP arrow shows the way back to the first page.

NOTE: You can quit the OSD at any time by pressing EXIT on the remote. Any changes you make will be saved. There is no need to navigate back through previous pages, unless you want to make more changes.

TRIM Menu

This menu allows you to adjust the individual volume level of your speakers “on-the-fly.” Although careful calibration is key to a good home theater, the Trims allow fine adjustment of the current program playing. The Trims add or subtract from the reference levels set during calibration using the Speaker Calibration menu. Recalibrating will reset these on-the-fly trims to zero.

Note: The Trim adjustments do not exceed +/-10 dB

34