Sherbourn Technologies PT-7010A Connecting to the TV or Projector using Component, Video

Connection Diagram 3:

Connecting to the TV or

Projector using Component

Video

This configuration shows the PT-7010A connections to the “main” video display where video output is taken from the Component Video outputs (the Red/Blue/Green trio) labeled “MAIN” on the back panel of the PT-7010A.

COMPONENT VIDEO Input on the TV or Projector. There may be more than one input on high end video screens

This configuration will give the best picture quality, especially if the video source component output begins as a native Component Video output. Remember that with the video transcoding feature, the PT-7010A will still allow your Composite or S-Video source inputs to up convert to the Component Video outputs, but you should always connect the highest quality video signal available.

17