Operation of the PT-7010A using the Remote

Turning on the MAIN Zone

1)Press the remote’s MAIN button to make sure the display is on the main display menu.

2)Press the 7010A device button to set the remote to operate the PT-7010A. The display changes to show the PT-7010A input selections.

3)Press PAGE to reach page 2, which shows the PRO LOGIC-II, PARTY, STEREO, and the trims for center, surrounds, and sub. On the right is ‘+’ (increase level) and on the left is ‘-’ (decrease level).

4)The following buttons with fixed labels are also programmed: Power, Volume Up, Volume Down, and Mute. The number pad accesses the tuner presets directly, and CH+/- steps through them. DIS is the +10 function, and ENT is station enter. The MODE buttons either side of the Joystick, allow you to select the different surround modes.

After pressing 7010A, you will enter PAGE 1 and PAGE 2 screens for commanding the PT-7010A by remote. These functions allow source selection and individual level control of specific speakers as labeled.

Turning on ZONE 2

1)Press the remote’s MAIN button to make sure the display is on the main display menu.

2)Press the ZONE 2 device button to set the remote to operate the Zone 2 of the PT-7010A. The display changes to show the PAGE 1 of the ZONE 2 input selections.

3)The hard buttons operate Zone 2 controls such as Power, Volume, Mute, Tuner Controls, and Presets.

4)Press PAGE to reach page 2, which shows Zone 2 on/ off, Zone 1 on/off, and balance left/ right.

Note: Zone 2 must first be enabled using the OSD (see page 37), or these controls will have no effect. Zone 2 is disabled by default as it is shipped from the factory. When enabled, Zone 2 can be turned on even if the Main Zone is off. See page 37 for more Zone 2 details.

After pressing ZONE2, you will enter PAGE 1 and PAGE 2 screens for commanding Zone 2 of the PT-7010A by remote. These functions allow source selection as well as control of turning on/off of both zones 1 & 2

30

Page 29 Page 31
Page 30
Image 30
Sherbourn Technologies Operation of the PT-7010A using the Remote, Turning on the Main Zone, Turning on Zone
Page 29 Page 31

PT-7010A specifications

Sherbourn Technologies PT-7010A is an advanced multi-channel power amplifier that has made a significant mark in the audio engineering world. Renowned for its performance and versatility, the PT-7010A caters to both audiophiles and professionals seeking a high-quality audio solution.

One of the standout features of the PT-7010A is its impressive power output. Delivering 100 watts per channel into an 8-ohm load, the amplifier guarantees robust sound reproduction across a variety of audio formats. With the ability to drive both low and high impedance loads efficiently, it handles demanding speaker systems with ease, making it a suitable choice for home theaters as well as professional audio environments.

Another key characteristic of the PT-7010A is its use of Class A/B amplification technology, which combines the efficiency of Class B with the linearity of Class A. This results in a rich, warm sound with minimal distortion, ensuring that the audio signal remains clear even at high volume levels. Additionally, the amplifier features extensive thermal management, allowing it to maintain optimal performance without overheating, thus enhancing its lifespan.

The build quality of the Sherbourn PT-7010A is equally impressive. Constructed with high-grade materials, the amplifier not only ensures durability but also minimizes vibrations that can adversely affect sound quality. Its sleek design makes it an aesthetically pleasing addition to any audio setup, whether in a living room or a commercial venue.

Connectivity is another highlight of the PT-7010A, featuring multiple input options, including balanced XLR and unbalanced RCA connections. This versatility allows for seamless integration with a wide array of audio sources, ranging from home theater systems to professional recording equipment.

The amplifier's user-friendly interface simplifies operation, with easy access to power settings and a front-panel indicator to monitor status. Furthermore, the PT-7010A is designed to be environmentally friendly, with energy-efficient components that reduce power consumption without compromising performance.

In conclusion, Sherbourn Technologies PT-7010A stands out as a powerful and versatile amplifier that combines high performance with advanced technology. Its quality construction, exceptional sound reproduction, and variety of connection options make it an excellent choice for anyone looking to elevate their audio experience, whether in home entertainment systems or professional settings.
Top Page Image Contents