Technical Specifications
LINE LEVEL INPUTS
Sensitivity: 125mV for 0.5V output Frequency Response:
+/- 0.5dB from 20Hz to 20kHz Signal to Noise Ratio:
(relative to 2V out) Analog 97dB Digital 105dB
Distortion (THD): <0.03%
Separation (at 1kHz): 70dB
Tone Control: Bass +/- 10dB Treble +/- 10dB
AUDIO OUTPUT SECTION
Frequency Response: Main Channels (Large) 20Hz to 20kHz
Subwoofer (LFE): 20Hz to 160Hz
(Note: The subwoofer crossover is set at 160Hz. The subwoofer plays the bass from the other channels using the LFE Bass Management function in the signal processing formats)
Delay Adjustment:Center
Rear
VIDEO SECTION
Video Inputs/Outputs: 1V
Composite Video: 18MHz,
(Video transcoder / up converter circuitry is completely automatic)
FM TUNER SECTION
FM Range: 87.5 to 108MHz, 0.2MHz steps
Usable FM Sensitivity (Mono): 1.6uV at 75&! At 75kHz: 15.2dBf (DEV 30dB)
50dB Quieting Sensitivity (Stereo): 31.6uV at 75&! 41.2dBf
Audio Output Bandwidth (+0.5,
30Hz to15kHz
AM TUNER SECTION
AM Range: 530 to 1710kHz, 10kHz steps Usable AM Sensitivity (S/N 30% modulated)
At 20dB S/N: 16uV / (600uV/m)
At 1mV input: 48dB
TRIGGER OUTPUTS 12V MAIN and ZONE 2
Trigger Current load <500mA total
MAIN Zone Trigger Relay Contact Rating: 24VDC at 2A Maximum
XLR OUTPUTS
Pin #1 = Ground
Pin #2 = Positive
Pin #3 = Negative
INFRARED OUTPUTS (OPTICALLY ISOLATED) 1/8" Jacks at 12V level
POWER REQUIREMENTS 120VAC, 60Hz, 40W
DIMENSIONS
Width 17 inches (432mm)
Depth
Height
SHIPPING WEIGHT 35 pounds (16kg)
59
