Sherbourn Technologies PT-7010A owner manual Remote Control

blockbuster with up to nine speakers and a subwoofer fully engaged!

For additional information, refer to the pages corresponding to the topic listed.

REMOTE CONTROL	Page 30
ON-SCREEN DISPLAY	Page 34
SPEAKER SIZE	Page 37
SPEAKER POSITION	Page 38
SPEAKER CALIBRATION	Page 39
BASS MANAGEMENT	Page 42
SURROUND MODES	Page 42-43

Shack and other local suppliers will have this type of product readily available and it is highly recommended.

Step 18 - In the SPEAKERS Menu, select the

SPEAKER POSITION menu.

Enter the distance from your listening position to EACH speaker. It will be handy to use that measuring tape to get as close as possible. Don’t sweat a few inches, but being off by a foot or more will compromise the system’s ability to create a cohesive sound field.

Step 19 - If you play a Dolby Digital or DTS encoded source, the PT-7010A will automatically select the correct surround mode. If it is a 2-channel source, you can select a surround mode using the remote’s MODE buttons or from the front panel.

Step 20 - The PT-7010A has many more options which are described in further detail in the OSD menu section on page

34.These options will help you customize the PT-7010A to suit your tastes. You can do this after you have used the PT- 7010A for a while and have a better idea of how you would like to customize your system.

Now you should be ready to enjoy your new Sherbourn PT- 7010A. It will allow you to listen to many great and wonderful audio formats from classic vinyl LP’s to the latest big screen

29