Safety Precautions

Read this Owner’s Guide thoroughly before attempting to install and configure the Sherbourn PT-7010A Pre/Pro/Tuner. All the safety and operation instructions should be read before any operation of the component(s) begin. After successful installation and configuration of the Sherbourn PT-7010A Pre/Pro/Tuner, be sure to retain this manual in a safe place for any future reference needs.

All warnings on the Sherbourn PT-7010A Pre/Pro/Tuner and in these operating instructions should be followed. Safety is a key component to a long lasting and trouble free installation. The vast majority of the subsequent safety precautions involve simple common sense. If you are not comfortable with the installation of audio/video entertainment equipment, it will be to your benefit to seek the services of a qualified installation professional.

The Sherbourn PT-7010A Pre/Pro/Tuner should NEVER be used near water such as a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. The Sherbourn PT-7010A Pre/Pro/Tuner should be situated so that its location or installation position does not interfere with proper ventilation. The Sherbourn PT-7010A Pre/Pro/Tuner should not be situated on a bed, sofa, rug, or similar surface that may block any ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed equipment rack that may impede the flow of air through ventilation openings. If installed in a closed equipment rack for custom installations, be sure to add forced air ventilation so that it has adequate air circulation.

The Sherbourn PT-7010A Pre/Pro/Tuner should be situated away from heat sources such as radiators, or any other devices which produce heat.

The Sherbourn PT-7010APre/Pro/Tuner should be connected to a power supply only of the type described in this Owner’s Guide and what is labeled on the PT-7010Acomponent. Power supply cords should be routed so that they are not in high foot traffic areas or pinched by items placed upon or against them, paying particular attention to cords at the wall plugs, convenience receptacles, and the point where they connect into the PT-7010A Pre/Pro/Tuner. The power cord of the PT-7010A Pre/Pro/Tuner should be unplugged from the outlet when unused for a long period of time.

When it’s time for cleaning the Sherbourn PT-7010A Pre/ Pro/Tuner, it should be cleaned only as recommended in this Owner’s Guide. Never spray liquids directly into the component’s vent openings. Care should be taken so that small objects do not fall into the inside of the PT-7010A Pre/Pro/ Tuner.

The following situations require your Sherbourn PT-7010A Pre/Pro/Tuner is serviced only by qualified service personnel:

1.The power-supply cord or the plug has been damaged; or

2.Objects have fallen, or liquid has spilled into the component; or

3.The PT-7010A has been exposed to rain; or

4.The PT-7010A does not appear to operate normally or exhibits a marked change in performance; or

5.The PT-7010A has been dropped, or its enclosure or chassis is damaged.

The user should not attempt to service the PT-7010A Pre/ Pro/Tuner beyond the means described in this Owner’s Guide. All other servicing should be referred to qualified service personnel. To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Pourpreevenir les chocs electriques ne pas utiliser cette fiche polarises avec un prolongateur, un prise de courant ou une autre sortie de courant, saufsi les lames peuvent titre inserees a fond sans laisser aucune parllle a decouvert.

Grounding or Polarization — Precautions should be taken so that the grounding or polarization means of the component is not defeated.

This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.

ATTENTION—Le present appareil numerique n’emetpas de bruits radioelectriques depassant las limites applicables aux appareils numeriques de class A/de class B (selon le cas) prescrites dans le reglement sur le brouillage radioelectrique edicts par les ministere des communications du Canada.

For questions regarding service please contact the Sherbourn Technical Support Department. To reach us by phone, please call 978-663-9385 between the hours of 9 a.m. and 5 P.M. EST. To reach us by the web at www.sherbourn.com, go to the Contact Us section and submit your technical support issue.

WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

5

Page 4 Page 6
Page 5
Image 5
Sherbourn Technologies PT-7010A owner manual Safety Precautions
Page 4 Page 6

PT-7010A specifications

Sherbourn Technologies PT-7010A is an advanced multi-channel power amplifier that has made a significant mark in the audio engineering world. Renowned for its performance and versatility, the PT-7010A caters to both audiophiles and professionals seeking a high-quality audio solution.

One of the standout features of the PT-7010A is its impressive power output. Delivering 100 watts per channel into an 8-ohm load, the amplifier guarantees robust sound reproduction across a variety of audio formats. With the ability to drive both low and high impedance loads efficiently, it handles demanding speaker systems with ease, making it a suitable choice for home theaters as well as professional audio environments.

Another key characteristic of the PT-7010A is its use of Class A/B amplification technology, which combines the efficiency of Class B with the linearity of Class A. This results in a rich, warm sound with minimal distortion, ensuring that the audio signal remains clear even at high volume levels. Additionally, the amplifier features extensive thermal management, allowing it to maintain optimal performance without overheating, thus enhancing its lifespan.

The build quality of the Sherbourn PT-7010A is equally impressive. Constructed with high-grade materials, the amplifier not only ensures durability but also minimizes vibrations that can adversely affect sound quality. Its sleek design makes it an aesthetically pleasing addition to any audio setup, whether in a living room or a commercial venue.

Connectivity is another highlight of the PT-7010A, featuring multiple input options, including balanced XLR and unbalanced RCA connections. This versatility allows for seamless integration with a wide array of audio sources, ranging from home theater systems to professional recording equipment.

The amplifier's user-friendly interface simplifies operation, with easy access to power settings and a front-panel indicator to monitor status. Furthermore, the PT-7010A is designed to be environmentally friendly, with energy-efficient components that reduce power consumption without compromising performance.

In conclusion, Sherbourn Technologies PT-7010A stands out as a powerful and versatile amplifier that combines high performance with advanced technology. Its quality construction, exceptional sound reproduction, and variety of connection options make it an excellent choice for anyone looking to elevate their audio experience, whether in home entertainment systems or professional settings.
Top Page Image Contents