Sherbourn Technologies PT-7010A owner manual Connecting a VCR, Connection Diagram

Connection Diagram 4:

Connecting a VCR

(Analog Audio and Composite Video)

This configuration shows a VCR connection where the audio output from the VCR is taken from the analog outputs (Red and White RCA jacks) and video output is taken from the Composite Video output (the Yellow RCA jack). If you plan to use the VCR for recording, you also must connect the PT-7010A’s VCR outputs into the VCR inputs.

If you plan to record with your VCR do not forget to connect the VCR OUTPUTS

from the PT-7010A into the VCR’s inputs

This configuration allows the PT-7010A to route the output of the VCR into the TV or projector. If your VCR has S-Video outputs, you may use that connection type in lieu of the Composite Video RCA jack as shown in the connection diagram.

18