Panasonic TQBH0205-4 When logging on without administrator authority, and then click NEXT

Turn on the projector and press the [NETWORK] button on the remote control.

Press the menu button to open the [NETWORK] menu, and then select from among [USER 1] through [USER 3] for [WIRELESS LAN] and press [ENTER].

Connecting with wireless LAN (cont.)

When logging on without administrator authority

Before getting started Wireless Manager ME 5.5, the PC's IP setting must be set to [Acquire IP address automatically]. Before use, contact your network administrator to make sure the proper setting.

AProjector settings

1

2

3 In wireless LAN detailed setting 1/3, turn off [DHCP※], configure [IP address※], [SUBNETMASK※], and [DEFAULT GATEWAY※], and then click [NEXT].

<Example>

WIRELESS DETAILED SETUP

	USER1	1/3
	NAME CHANGE		USER1
	DHCP		OFF
	IP ADDRESS		192.168. 11.100
	SUBNETMASK		255.255.255.	0
	RETURN
SELECT	GATEWAY		192.168. 11.	1
	ENTER	NEXT	CANCEL

※“Glossary” (See page 70)

•Wireless LAN and wired LAN cannot be used in the same segment.

•When multiple devices are connected, a unique IP address must be allocated to each device.

4	In wireless LAN detailed setting 2/3, enter [SSID※] and set [MODE] to [AD HOC※],
	and then click [NEXT].
	<Example>
		WIRELESS DETAILED SETUP
			USER1		2/3
			SSID
				Panasonic Projector
			MODE
					AD HOC
			AUTHENTICATION
					OPEN
		RETURN	ENCRYPTION		NONE
			CHANNEL		1
		SELECT
		ENTER	RETURN	NEXT	CANCEL

※“Glossary” (See page 71)

•SSID has to be entered in lower-case alphanumeric letters.

•See pages 53 to 55 for information on other network settings.

5 Press [OK] in wireless LAN detailed setting 3/3.

25