Panasonic TQBH0205-4 Time settings, Email settings, Connection test, Using WebBrowser cont

Using WebBrowser (cont.)

Time settings

Click [Detailed set up]→[Adjust clock] in the menu.

Time zone: Select the time zone and click [Set time zone].

Time	: Enter the current date and time in
	[Date] and [Time], and then click [Set
	date and time].

Email settings

You can specify two email recipients.

Click [Detailed set up]→[E-mail set up] in the menu.

• [MAIL SERVER]
ENABLE	: Enable or disable email transmission.
SMTP SERVER NAME	: Enter the SMTP server name.
• [MAIL OPTION]
MAIL FROM	: Enter the sender’s email address.
MEMO	: Enter a description of the sender.

• [TEMPERATURE WARNING SET UP]

MINIMUM TIME: Enter the interval for sending email.

INPUT AIR TEMPERATURE: Select the temperature of the intake sensor at which to send a warning message.

• [E-MAIL ADDRESS]
E-MAIL ADDRESS	: Enter the email addresses of the
	recipients.
MAIL CONTENTS	: Change the type of message as desired.
	When sending messages to mobile phones, select “SIMPLE.”
ERROR	: Select ON to send email when errors occur.
LAMP RUNTIME	: Select ON to send email when “at REMAIN” is reached.
FILTER REMAINING TIME	: Select ON to send email when “at REMAIN” is reached.

INPUT AIR TEMPERATURE: Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is

	exceeded.
PERIODIC REPORT	: Send a message with the projector status at the selected date and time.

When [submit] is clicked, the settings are applied.

Connection test

You can confirm if a network connection is established with Mail server,

POP server, DNS server or the like.

Click [Detailed setup] → [Ping test] from the network main menu.

Destination IP address: Enter the IP address of the server you want to test, and then click [Submit].

If succeeded in connection, the following display appears.

If failed in connection, the following display appears.

65