Replacing the Pentium II Processor
This subsection provides the procedure for upgrading the Pentium II Processor in your system. The Pentium II processor is packaged as a Single Edge Connector Cartridge (SECC), packaged as a Single Edge Processor Package (SEPP), or packaged as a Single Edge Connector Cartridge Version 2 (SECC2).
The SECC packaged cartridge includes:
nprocessor core with an integrated 16 KB primary (L1) cache
nsecondary (L2) cache
nthermal plate
nback cover.
The SEPP packaged board includes:
nprocessor core with an integrated 16 KB primary (L1) cache
nsecondary (L2) cache.
The SECC2 packaged cartridge includes:
nprocessor core with an integrated 16 KB primary (L1) cache
nsecondary (L2) cache.
nback cover.
CAUTION
Electrostatic discharge (ESD) can damage components; place them on an antistatic surface. Modify the system board using an antistatic wrist strap attached to chassis ground.
WARNING
If the system has been running, any processor and heat sink already installed on the board will be hot. To avoid the possibility of a burn, let the components cool for 10 minutes before continuing with the procedures described here
