Whirlpool WHES48 operation manual Recharge Button, Recharge NOW, SET Recharge Time

Page 15

Programming Your E-Z Touch Water Softener

RECHARGE BUTTON

The long button at the bottom of the softener status screen (See Figure 29) will show recharge status, including whether a recharge is scheduled (See Figure 41). During a recharge cycle, a countdown clock is displayed in the button (See Figure 32).

RECHARGE NOW

To manually initiate an immediate recharge:

1. Press the RECHARGE button at the bottom of the softener status screen (See Figure 29).

FIG. 29

2. The display will change to show the following screen.

FIG. 30

3. Press the RECHARGE NOW button. The recharge begins and display will change to show a recharge status screen, like the one in Figure 31.

FIG. 31

4. To return to the softener status screen, press the RETURN ( ) button.

FIG. 32

SET RECHARGE TIME

When the softener’s electronic control is first powered up, the default time for starting an automatic recharge is 2:00 a.m. This is a good time in most households because water is not being used.

To change the recharge time:

1. Press the RECHARGE button on the softener sta- tus screen (See Figure 33).

FIG. 33

2. The display will change to show the following screen.

FIG. 34

3. Press the RIGHT ( ) button. The display will change to show the following screen.

FIG. 35

FIG. 36

4. Press the SET RECHARGE TIME button and the display will change to show the Set recharge time screen (See Figure 36).

5. Press the UP ( ) or DOWN ( ) buttons to set the recharge time in 1 hour increments. Hold the but- ton down to rapidly advance. Be sure AM or PM is correct (unless softener is set for a 24-hour clock). When the desired recharge start time is shown, press the RETURN ( ) button. The display will go back to the softener status screen.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model WHES48 Water Softener Warranty Model WHES48 Salt Storage Capacity 200 lbs Specifications & DimensionsYour safety and the safety of others are very important Water Softener SafetySediment Inspect ShipmentWater Conditioning Information IronPlumbing Codes Installation RequirementsProper Order to Install Water Treatment Equipment Location RequirementsInlet / Outlet Plumbing Options Valve Drain RequirementsTypical Installation Installation InstructionsInstall the Brine Tank Overflow Elbow Turn OFF Water SupplyMove the Water Softener Into Place Install Valve Drain Hose Install Salt Storage Tank Overflow HoseComplete Inlet and Outlet Plumbing Plug in the Water Softener Sanitize the Water Softener / Sanitize After ServiceTest for Leaks ADD Water and Salt to the Salt Storage TankWater Softener Setup Setup ProcedureTouch Screen Programming Your E-Z Touch Water Softener SET Contrast SET LanguageRecharge Button Recharge NOWSET Recharge Time Setup Button Schedule a RechargeSET Time SET Iron Level SET HardnessInfo Information Button Retrieving Information from Water Softener Management SystemCustomizing Features / Options SET Clean FeatureSET Clean Time SET Salt Type SET Salt EfficiencyHardness Units Volume UnitsSET Units Time FormatRestore Factory Settings Power Outage MemoryBreaking a Salt Bridge Routine MaintenanceCleaning the Nozzle & Venturi Adding SaltChecking the Turbine TroubleshootingAutomatic Electronic Diagnostics Other Initial DiagnosticsManualadvance Regeneration Check Softener Exploded View PWA Softener Parts ListValve Exploded View Valve Parts List

WHES48 specifications

The Whirlpool WHES48 is an advanced water softener designed to provide exceptional water quality for both residential and commercial applications. This model stands out in the market due to its effective water treatment capabilities and user-friendly features.

One of the primary characteristics of the WHES48 is its high capacity, which can handle up to 48,000 grains, making it ideal for large families or homes with significant water usage. This capacity allows for efficient removal of hardness minerals such as calcium and magnesium, which can cause scale buildup in plumbing and appliances. By softening the water, the WHES48 helps to extend the lifespan of faucets, water heaters, and other fixtures, providing significant savings over time.

The WHES48 features a modern demand-initiated regeneration system that optimizes salt and water usage. This technology ensures that regeneration only occurs when necessary, reducing waste and conserving resources. The system monitors water consumption patterns, meaning it regenerates during off-peak hours, further enhancing efficiency.

Another significant advantage of the Whirlpool WHES48 is its user-friendly digital control panel. This intuitive interface allows users to easily program the system for their specific needs and provides a clear display of water usage data, remaining salt levels, and system status. Additionally, the softener is equipped with a bypass valve, allowing homeowners to direct hard water to their taps if ever needed.

Installation is a straightforward process, thanks to the compact design and included installation kit. The WHES48 can fit comfortably in most spaces, making it a versatile option for various home layouts.

The Whirlpool WHES48 also emphasizes low maintenance, with a self-cleaning feature that reduces the need for frequent servicing. It uses food-grade salt, making it safe for households with children and pets.

In summary, the Whirlpool WHES48 is a robust and efficient water softener offering advanced features like high capacity, demand-initiated regeneration, and user-friendly monitoring. Combined with its low maintenance requirements, this model serves as an excellent investment for anyone seeking to improve their home’s water quality and protect their plumbing systems.
Top Page Image Contents