Whirlpool WHES48 operation manual Specifications & Dimensions, Salt Storage Capacity 200 lbs

Page 3

Specifications & Dimensions

 

 

Model WHES48

Model Code

 

EZ 48

Rated Softening Capacity (Grains @ Salt Dose)

 

14,300 @ 2.8 lbs.

 

37,900 @ 10.5 lbs.

Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose)

48,000 @ 18.1 lbs.

5,107 @ 2.8 lbs.

Water Used During Regeneration @ Minimum Salt Dose

3.0 gal./1,000 grains

Total Water Used Per Regeneration @ Maximum Salt Dose

44.2 gallons

Rated Service Flow Rate

 

11.9 gpm

Amount of High Capacity Ion Exchange Resin

 

1.33 cu. ft.

Pressure Drop at Rated Service Flow

 

15 psig

Water Supply Max. Hardness

 

160 gpg

Water Supply Max. Clear Water Iron

 

12 ppm*

Water Pressure Limits (minimum / maximum)

 

20 - 125 psi**

Water Temperature Limits (minimum / maximum)

 

40 - 120 °F

Minimum Water Supply Flow Rate

 

3 gpm

Maximum Drain Flow Rate

 

2.0 gpm

Salt Storage Capacity

 

200 lbs.

*Capacity to reduce clear water iron is substantiated by WQA test data. State of Wisconsin

requires additional treatment if water supply contains clear water iron exceeding 5 ppm.

**Canada working pressure limits: 1.4 - 7.0 kg/cm2.

 

 

These systems conform to NSF/ANSI 44 for the specific performance claims as verified

and substantiated by test data.

 

 

The efficiency rating is only valid at the stated salt dose. These softeners were efficiency

rated according to NSF/ANSI Standard 44.

 

 

Variable Salt Dose: The salt dose is selected by the electronic controls at regeneration

time based on the amount needed.

 

19”

 

 

IN

 

 

3-3/4”

18”

 

OUT

 

 

IN – OUT

 

41-1/2”

47-7/8”

 

 

39-1/2”

FIG. 1

Questions? Call Toll Free 1-866-986-3223 Monday- Friday, 8 AM - 7 PM EST

or visit www.ecodynewatertreatment.com

When you call, please be prepared to provide the model, date code and serial number, found on the rating decal, typically located on the rim below the salt lid hinges.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model WHES48 Water Softener Warranty Model WHES48 Salt Storage Capacity 200 lbs Specifications & DimensionsYour safety and the safety of others are very important Water Softener SafetySediment Inspect ShipmentWater Conditioning Information IronPlumbing Codes Installation RequirementsProper Order to Install Water Treatment Equipment Location RequirementsInlet / Outlet Plumbing Options Valve Drain RequirementsTypical Installation Installation InstructionsInstall the Brine Tank Overflow Elbow Turn OFF Water SupplyMove the Water Softener Into Place Install Valve Drain Hose Install Salt Storage Tank Overflow HoseComplete Inlet and Outlet Plumbing Plug in the Water Softener Sanitize the Water Softener / Sanitize After ServiceTest for Leaks ADD Water and Salt to the Salt Storage TankWater Softener Setup Setup ProcedureTouch Screen Programming Your E-Z Touch Water Softener SET Contrast SET LanguageRecharge Button Recharge NOWSET Recharge Time Setup Button Schedule a RechargeSET Time SET Iron Level SET HardnessInfo Information Button Retrieving Information from Water Softener Management SystemCustomizing Features / Options SET Clean FeatureSET Clean Time SET Salt Type SET Salt EfficiencyHardness Units Volume UnitsSET Units Time FormatRestore Factory Settings Power Outage MemoryBreaking a Salt Bridge Routine MaintenanceCleaning the Nozzle & Venturi Adding SaltChecking the Turbine TroubleshootingAutomatic Electronic Diagnostics Other Initial DiagnosticsManualadvance Regeneration Check Softener Exploded View PWA Softener Parts ListValve Exploded View Valve Parts List

WHES48 specifications

The Whirlpool WHES48 is an advanced water softener designed to provide exceptional water quality for both residential and commercial applications. This model stands out in the market due to its effective water treatment capabilities and user-friendly features.

One of the primary characteristics of the WHES48 is its high capacity, which can handle up to 48,000 grains, making it ideal for large families or homes with significant water usage. This capacity allows for efficient removal of hardness minerals such as calcium and magnesium, which can cause scale buildup in plumbing and appliances. By softening the water, the WHES48 helps to extend the lifespan of faucets, water heaters, and other fixtures, providing significant savings over time.

The WHES48 features a modern demand-initiated regeneration system that optimizes salt and water usage. This technology ensures that regeneration only occurs when necessary, reducing waste and conserving resources. The system monitors water consumption patterns, meaning it regenerates during off-peak hours, further enhancing efficiency.

Another significant advantage of the Whirlpool WHES48 is its user-friendly digital control panel. This intuitive interface allows users to easily program the system for their specific needs and provides a clear display of water usage data, remaining salt levels, and system status. Additionally, the softener is equipped with a bypass valve, allowing homeowners to direct hard water to their taps if ever needed.

Installation is a straightforward process, thanks to the compact design and included installation kit. The WHES48 can fit comfortably in most spaces, making it a versatile option for various home layouts.

The Whirlpool WHES48 also emphasizes low maintenance, with a self-cleaning feature that reduces the need for frequent servicing. It uses food-grade salt, making it safe for households with children and pets.

In summary, the Whirlpool WHES48 is a robust and efficient water softener offering advanced features like high capacity, demand-initiated regeneration, and user-friendly monitoring. Combined with its low maintenance requirements, this model serves as an excellent investment for anyone seeking to improve their home’s water quality and protect their plumbing systems.
Top Page Image Contents