Through-the-Wall Cabinet Installation

2.Using #10 x ¹⁄₂" pan-head Phillips screws, attach the bracket to the cabinet. Repeat for the other bracket.

3.Turn the adjustment bolt for each bracket until the bolt touches the wall.

4.Turn the locking nut on the adjustment bolt to lock in position.

Complete Window Installation

1.Insert the foam window sash seal behind the top of the lower window sash and against the glass of the upper window.

2.Place one window-lock bracket on top of the lower window and against the upper window sash on each side of the window.

3.Use a ³⁄₃₂" drill bit to drill a starter holes through the holes in each bracket into the window sash.

4.Attach both the window-lock brackets to the window sash with #10 x ³⁄₄" round-head screws to secure the window in place.

A A

A. Support bracket

B. Locking nut

C. Adjustment bolt

A. Window lock brackets

B. Upper window glass

C. Foam window sash seal

NOTES:

■Handle the air conditioner gently.

■Be sure your air conditioner cabinet does not fall out of the opening during installation or removal.

■The location where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded

3 prong outlet.

■Do not block the louvers on the front panel.

■Do not block the louvers on the outside of the air conditioner.

■It is the customer's responsibility and obligation to have this product installed by a qualified technician familiar with through-the-wall room air conditioner installations.

Option 2—Plastered wall with no molding

If the plastered wall is to be flush with the cabinet and no molding is used, the wood frame must be set ¹⁄₂" (13 mm) into the inside wall.

A B C

Option 1—Wood, metal or plastic molding

When using a wood, metal or plastic molding, the wood frame should line up with the inside wall as shown.

A B C

A. Molding	C. Wood frame
B. Inside wall	D. Louvers

A. Plastered wall	C. Wood frame
B. Inside wall	D. Louvers

Install Wood Frame

1.Construct the wood frame. See “Location Requirements” for dimensions.

2.Measure the outside width and height of the frame to determine the wall opening dimensions.

3.Cut the opening through the wall. Remove and save the insulation.

ACE184PT0 specifications

The Whirlpool ACE184PT0 is a well-engineered appliance that caters to the needs of modern households looking for efficient cooling solutions. This air conditioner is designed with user-friendliness and advanced technology in mind, ensuring an optimal indoor climate during the hottest months of the year.

One of the standout features of the ACE184PT0 is its impressive cooling capacity, allowing it to effectively cool spaces up to a substantial square footage. With a sleek and compact design, this air conditioner can fit seamlessly into various room layouts without taking up too much space. Its aesthetically pleasing appearance is complemented by a user-friendly control panel, which simplifies the operation.

The ACE184PT0 incorporates advanced inverter technology. This innovation allows for variable speed operation, providing precise temperature control while enhancing energy efficiency. By adjusting the compressor speed according to the current cooling requirements, this air conditioner significantly reduces energy consumption compared to traditional models. This not only leads to lower electricity bills but also contributes positively to environmental sustainability.

Whirlpool has equipped the ACE184PT0 with a multi-stage filtration system, which plays a crucial role in maintaining indoor air quality. This system captures dust, allergens, and other particulate matter, ensuring that the air circulated within the room is clean and fresh. The washable filter can be easily removed and cleaned, extending its lifespan and maintaining optimal performance.

In addition to powerful cooling capabilities, the ACE184PT0 also features a dehumidification option. This is particularly beneficial in humid climates, as it helps to reduce excess moisture in the air, making the environment more comfortable. The user can switch effortlessly between various cooling and dehumidifying modes to suit their preferences.

Another noteworthy characteristic is the programmable timer and remote control feature. This allows users to set cooling schedules tailored to their lifestyle, enabling the unit to turn on or off automatically, resulting in added convenience and energy savings.

With its combination of aesthetic appeal, energy efficiency, multiple functionalities, and advanced technologies, the Whirlpool ACE184PT0 is an excellent choice for consumers seeking reliable and effective air conditioning solutions for their homes.