Logitech Receiver manual Troubleshooting, How do I get back to the Squeezebox Setup menu?

22 Logitech®

Troubleshooting

The following tips and answers to frequently asked questions will help resolve problems you may encounter. You can fi nd answers to additional questions on our web site at http://faq.slimdevices.com/.

How do I get back to the Squeezebox Setup menu?

Press and hold the LEFT arrow for fi ve seconds to bring Squeezebox back to the setup menu.

How do I reset Squeezebox to factory default settings?

Plug the power connector into Squeezebox while holding down the ADD button on the remote until you see the SET UP NETWORKING prompt.

The player doesn’t obtain an IP address.

Check all your network connections, and make sure that the DHCP server is running.

Try a different ethernet cable, even if the hub indicates a good link. Make sure you are using the latest fi rmware for your router or access point.

Can I connect Squeezebox directly to my computer?

You can connect Squeezebox directly to your computer (without a local network or hub) using an ethernet crossover cable. You can purchase a crossover cable at most retail computer stores. Confi gure your network adaptor and Squeezebox with static IP addresses so that they can fi nd each other. Visit http://faq.slimdevices.com and search for CROSSOVER for additional information.

I can’t enter my wireless password.

If your network is using WEP encryption, you’ll need the hexadecimal WEP key for your wireless network. Hexadecimal keys are either 10 or 26 digits of 0-9 or the letters A to F. Some wireless access points or routers use text passwords for WEP. The confi guration software for your wireless device can show the key in hexadecimal. Airport users can use Airport Admin Utilities. Use the Base Station menu to fi nd the Equivalent Network Password and use the value displayed.

The web interface won’t come up, even though Squeezebox is working.

Try using the following URL: http://127.0.0.1:9000/. (Be sure to type the “http://” part, as some versions of Internet Explorer require it when accessing a URL by IP address.)

Squeezebox™ Owner’s Guide 23

How do I find the IP address of the computer where I have installed SlimServer?

On Windows®: Click Start > Run, type in cmd and hit enter. In the DOS window, type ipconfig and hit enter.

On Mac OS X: Go to System Preferences > Network. Under the ‘Show:’ drop-down,

pick the network interface you are using, then click TCP/IP. Your IP address will be displayed.

On Linux® or UNIX®: Open up a shell and type ipconfig and hit enter.

Squeezebox can’t connect to my computer running SlimServer.

This could be due to a fi rewall being active on the computer.

Macintosh®: You will have to create a new exception in the built-in fi rewall to allow the Squeezebox to connect to SlimServer. To do this:

1.Open System Preferences > Sharing, and click ‘Firewall’

2.Click ‘New...’ to create a new rule

3.For ‘Port Name:’ choose ‘Other’

4.For ‘Port Number, Range or Series:’ type ‘3483, 9000’

5.For ‘UDP Port Number(s):’ specify ‘3483’ (Mac OS 10.4 only)

6.For ‘Description:’, type ‘SlimServer’

7.Click OK, and ensure that your new exception is checked on

Windows®: Windows® XP Service Pack 2 turns on a built-in fi rewall by default. You will need to confi gure the fi rewall to allow access to SlimServer. To do this:

1.Go to Control Panel

2.Click Security Center

3.Click Windows Firewall under ‘Manage security settings for:’

4.Click the Exceptions tab

Add an exception for the following three ports by clicking ‘Add Port...’:

•Port number: 3483 (TCP) - Name: SlimServer Control

•Port number: 3483 (UDP) - Name: SlimDiscovery

•Port Number: 9000 (TCP) - Name: SlimServer Web