Bacharach 2072-0400 manual Glossary of Terms, General Operating Guidelines

Page 6

Introduction

MAC2000

1.1Glossary of Terms

A/C

Air conditioner or air conditioning

A/C System

The vehicle’s air conditioning system

Unit

The MAC2000 itself

Screen

LCD Display

Contaminated

Refrigerant that has been mixed with some

 

other type of refrigerant.

1.2General Operating Guidelines

•The MAC2000 monitors the AC line voltage and disables itself if the voltage drops below 100 VAC or rises above 135 VAC. An error message will be displayed on screen when the line voltage is out of tolerance. The unit must be turned OFF and then back ON to reset the voltage monitoring circuitry. Extension cords must be a minimum of 14 AWG and kept as short as possible.

Common causes for electrical problems include:

-Long extension cords

-Faulty, overloaded electrical circuits

-Drop lights

-Improper ground or improper polarity

•The screen shows options and gives instructions for most service and maintenance tasks. Read the on-screen prompts and follow their instructions.

•The MAC2000 prompts a technician to check the system oil drain bottle on the side of the unit for recovered oil. Any system oil that is lost is automatically drained during recovery. A technician must measure and record the lost amount of oil in order to know how much new oil to add during charging. Refer to the A/C system manufacturer’s service manuals for oil specifications. Dispose of used oil properly.

•In general, it is best to leave the MAC2000 turned ON throughout the workday. This allows the unit time to purge itself of air and refill the internal storage tank. Turn the unit OFF at the end of the day.

2

Instruction 2072-0400

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Instruction Register Your Warranty by Visiting Table of Contents Operating Notes Introduction Glossary of Terms General Operating GuidelinesComponent Location and Description MAC2000 Control PanelMAC2000 Front View MAC2000 Right-Side View MAC2000 Left-Side View MAC2000 Back View Introduction MAC2000 Using the Function Keys Introduction MAC2000 Initial Set-Up Initial Set-Up InstructionsInitial Set-Up MAC2000 External Source Tank Testing Checking Vehicles for Possible Contaminated SystemsInitial Set-Up MAC2000 Operation MAC2000 Operational OverviewRecovery Vacuum Charge Snapshot Next Diagnosing A/C System Operation Using the Snap-Shot Mode Tank air Data ChangeSnap-Shot Transmitter Main Capture Reset Recover Menu Print Recovery Mode Vacuum Mode Evacuation Charge Mode Instruction System Flush Mode Oil Flush Instruction Refrigerant Management System Internal Tank Manual Refill System Set Up Identify RefrigerantCheck Internal Tank for Air Operation MAC2000 Maintenance Changing the Filter DrierReplacing the External Source Tank Replacing the Printer Paper Replacing the Refrigerant Identifier Filter Parts and Service PartsService Centers California CanadaPage World Headquarters Hunt Valley Circle, New Kensington, PA

2072-0400 specifications

Bacharach 2072-0400 is a state-of-the-art combustion analyzer that stands out in the field of HVAC and building performance testing. Designed primarily for technicians and professionals, this innovative device is equipped with advanced sensing technologies that enable accurate measurement of multiple combustion parameters, ensuring that heating systems operate efficiently and safely.

One of the main features of the Bacharach 2072-0400 is its ability to measure combustion gases, including carbon monoxide, carbon dioxide, oxygen levels, and flue gas temperature. This capability allows technicians to conduct thorough analyses of heating systems, ensuring that they are not only efficient but also compliant with safety standards. By providing real-time data, the device assists technicians in identifying potential issues before they escalate, ultimately contributing to improved system longevity and reduced emissions.

Another highlight of the Bacharach 2072-0400 is its user-friendly design. The device boasts a clear, backlit LCD screen that presents data in an easy-to-read format. Intuitive navigation through its menus ensures that users can quickly access various functions without extensive training. Additionally, the compact and lightweight design of the analyzer makes it convenient for on-site use in a variety of environments.

In terms of technology, the Bacharach 2072-0400 incorporates state-of-the-art sensors that enhance measurement accuracy and reliability. The device utilizes infrared technology for measuring carbon dioxide and temperature, while electrochemical sensors are employed for carbon monoxide detection. These technologies collectively ensure that users receive precise readings, contributing to more informed decision-making during system evaluations.

Furthermore, the Bacharach 2072-0400 includes features such as data logging capabilities, which allow users to store and retrieve measurements for later analysis. This functionality is particularly beneficial for contractors needing to document system performance or for those who must comply with regulatory requirements.

The analyzer also supports easy connectivity options, enabling users to transfer data to laptops or mobile devices for further analysis or reporting. This level of connectivity ensures that the results can be easily communicated to clients or stakeholders, enhancing the professional image of technicians using the device.

Overall, the Bacharach 2072-0400 is an indispensable tool for modern HVAC professionals. With its comprehensive measurement capabilities, advanced sensor technology, user-friendly interface, and data management features, the device sets a new standard in combustion analysis. As energy efficiency and environmental impact become increasingly important, the Bacharach 2072-0400 provides the essential insights needed to optimize combustion systems effectively.
Top Page Image Contents