Bosch Appliances FMR-7036 Device Description, Installing the Reference Card, Surface Mounting

Page 3

FMR-7036 Fire Annunciator Keypad

1.0

Notice

 

 

 

1.0 Notice

These instructions cover the installation of the Bosch Security Systems, Inc. FMR-7036 Fire Annunciator Keypad in a fire system supervised by a Bosch FPD- 7024 Fire Alarm Control/Communicator.

Install, test and maintain the FMR-7036 according to these instructions, NFPA 72, local codes, and the authority having jurisdiction. Failure to follow these instructions may result in failure of the device to operate properly. Bosch Security Systems, Inc. is not responsible for improperly installed, tested or maintained devices.

NFPA 72 requires a complete system-wide functional test be performed following any modifications, repair, upgrades, or adjustments made to the system’s components, hardware, wiring, programming, and software/firmware.

These instructions contain procedures to follow in order to avoid personal injury and damage to equipment.

2.0 Device Description

The FMR-7036 is a four-wire LCD annunciator keypad for the FPD-7024 Fire Alarm Control/Communicator. It may be surface mounted to a standard three-gang box or with the provided mounting backplate.

Figure 1:

FMR-7036 Fire Annunciator Keypad

 

SILENCED

TROUBLE

 

ALARM

SUPERVISORY

 

 

FIRE SYSTEM ANNUNCIATOR

 

 

LOCK

 

 

UNLOCK

3.0 Installing the Reference Card

Aquick-reference card is provided and needs to be installed in the receiving slot indicated in Figure 2. The slot is located behind the mounting base holding the circuit board.

Install the reference card before securing the keypad.

Figure 2: Reference Card Installation

FMR-7036 Reference Card

2

 

1

 

Slide reference guide between keypad holding tabs.

1 - Reference Card Stopper Tabs

2 - Holding Tabs

4.0 Mounting the FMR-7036

The keypad should be mounted no higher than shoulder height of the shortest person using the system.

Remove the keypad’s cover.

Insert a small flathead screwdriver in each slot at the bottom of the base. Press up, and pull the cover off.

4.1Surface Mounting

Use the base as a template to mark the location of the mounting holes (refer to Figure 3 on page 4 for mounting hole location).

Provide an opening in the mounting surface for the wiring.

Pre-start the mounting screws.

Do not secure the base at this point.

4.2Electrical Box Mounting

Refer to Figure 3 on page 4 for the location of the mounting holes.

Bosch Security Systems, Inc. 9/08 F01U010584-01

3

Image 3
Contents FMR-7036 Installation InstructionsContents Surface Mounting Installing the Reference CardDevice Description Mounting the FMR-7036Setting the FMR-7036 Wiring the FMR-7036Address FPD-7024 Local Programming FMR-7036 ProgrammingFMR-7036 Operation FPD-7024 Remote ProgrammingScrolling Buttons ResetKeylock Switch Reset SwitchFMR-7036 Troubleshooting Tips TroubleshootingSpecifications TroubleshootingBosch Security Systems, Inc Perinton Parkway Fairport, NY
Related manuals
Manual 2 pages 49.36 Kb

FMR-7036 specifications

The Bosch Appliances FMR-7036 is a remarkable addition to the Bosch lineup, designed to elevate the culinary experience in any modern kitchen. Known for their quality and innovation, Bosch has consistently pushed the boundaries of appliance technology, and the FMR-7036 is no exception.

One of the standout features of the FMR-7036 is its exceptional cooking capabilities. This appliance boasts a spacious oven capacity that allows users to prepare multiple dishes simultaneously. With precise temperature control, users can confidently roast, bake, and broil with consistent results. The integrated convection system ensures even heat distribution, promoting faster cooking times and enhanced flavors.

The FMR-7036 is equipped with Bosch's cutting-edge EcoSilent motor, which operates quietly and efficiently. This technology not only reduces noise levels but also contributes to energy savings, making it an environmentally friendly choice for energy-conscious consumers. With its Energy Star certification, the FMR-7036 is designed to operate with minimal energy consumption while delivering optimal performance.

Featuring a sleek stainless steel design, the FMR-7036 seamlessly integrates into any kitchen aesthetic. Its intuitive user interface includes a digital display and touch controls, allowing for easy navigation through various cooking functions. The appliance also comes with multiple cooking modes, including steam, grill, and bake, providing versatility for culinary experimentation.

Safety is a paramount consideration in the design of the FMR-7036. The appliance is equipped with an automatic shut-off feature, ensuring that users can cook with peace of mind. Additionally, the cool-touch exterior helps prevent burns, making it safe for families with children.

Cleaning the FMR-7036 is a breeze, thanks to its self-cleaning function. This feature utilizes high temperatures to burn off food residue, leaving the oven interior spotless without the need for harsh chemicals. The removable racks and smooth surfaces further facilitate easy cleaning.

Overall, the Bosch Appliances FMR-7036 combines style, functionality, and advanced cooking technologies, making it an ideal choice for both home chefs and everyday cooks. With its thoughtful design and innovative features, this appliance is poised to enhance any cooking experience, proving that Bosch continues to lead the market in quality and performance. Whether it’s preparing a weeknight dinner or a holiday feast, the FMR-7036 is a dependable kitchen companion that ensures delicious results every time.