FMR-7036 Programming, FMR-7036 Operation

FMR-7036 Fire Annunciator Keypad 7.0	FMR-7036 Programming

Up to three keypads may be used on any single 1,000 ft. (305 m) run of #18 AWG (1.2 mm) wire.

Bring the wiring through the wire entrance in the keypad’s base. Connect the wiring to the keypad’s connector. Refer to Figure 4 on page 4.

Secure the base.

Place the keypad cover onto the base. Make sure the openings for the rubber keys line up and do not crush the keys beneath the grid. Test each key to ensure proper operation.

Figure 6: FMR-7036 Wire Connections

8.Press [2] to select 2-AUTHORITY LEVEL.

9.Press [2] to select 2-MEDIUM.

10.Press [*] to exit programming mode.

11.Test all FMR-7036 functions.

A PIN is required for remote devices to enable the use of the FMR-7036. To do this, press [3] for PROG SYSTEM, [5] for PIN REQUIRED?, [2] for REMOTE PIN and

[1]for YES. Press [*/Back] to exit the programming mode.

7.2FPD-7024 Remote Programming

1.	Open a session of RAM IV.
2.	Open the desired panel.

Red

Black

Green

Yellow

Consult your panel’s Reference Guide for option bus wiring requirements.

3.	From the menu tree window, open SECURITY.
4.	Select the user from the appropriate submenu.
5.	Set the PIN in the appropriate column (9753).
6.	Set the authority level in the appropriate
	column (MEDIUM).
7.	Download the changes/updates to the panel.

1 - FMR-7036 Wire Connector

7.0FMR-7036 Programming

When the Silence or Reset keys on the FMR-7036 keypad are pressed, the keypad transmits a pre- programmed, hard coded key sequence of 9753, followed by a control character that either silences or resets the control.

In order for the FMR-7036 to work with the control, a passcode of 9753 must be programmed into the control. See the following instructions for specific control panel programming.

7.1FPD-7024 Local Programming

1.Enter the programming mode using the correct programming passcode.

2.Select menu item 2-SECURITY.

3.Select menu item 1-PINS.

4.Select menu item 2-USER PINS.

5.Enter a User Number. Pick a user who has not already been assigned a PIN.

6.Enter 9753 for the PIN.

7.Press [*] twice to view the SECURITY menu.

For more information regarding RAM IV, see the RAM IV Operations Manual (P/N: 38849).

8.0 FMR-7036 Operation

There are six keys on the FMR-7036 used for controlling annunciator and control panel operation: Silence, Reset, and four scrolling buttons.

8.1Silence

The Silence key is used to silence alarm and trouble sounds at the annunciator, as well as NAC circuits and sirens connected to the control panel, provided the sounders are programmed for “SILENCEABLE” (refer to the control panel’s programming guide for information on NAC or alarm output configuration).

The Silence key will not remove the alarm condition from the control. It only silences local annunciator sounders as well as silenceable output devices.

Pressing the Silence key causes the FMR-7036 to transmit a hard coded passcode of 9753 followed by the Silence key normally found on the FMR-7036 keypad. The control must be programmed to accept this code before the FMR-7036 will work (refer to Section 7.0 on page 5 of this installation guide).

Bosch Security Systems, Inc. 9/08 F01U010584-01

FMR-7036 specifications

The Bosch Appliances FMR-7036 is a remarkable addition to the Bosch lineup, designed to elevate the culinary experience in any modern kitchen. Known for their quality and innovation, Bosch has consistently pushed the boundaries of appliance technology, and the FMR-7036 is no exception.

One of the standout features of the FMR-7036 is its exceptional cooking capabilities. This appliance boasts a spacious oven capacity that allows users to prepare multiple dishes simultaneously. With precise temperature control, users can confidently roast, bake, and broil with consistent results. The integrated convection system ensures even heat distribution, promoting faster cooking times and enhanced flavors.

The FMR-7036 is equipped with Bosch's cutting-edge EcoSilent motor, which operates quietly and efficiently. This technology not only reduces noise levels but also contributes to energy savings, making it an environmentally friendly choice for energy-conscious consumers. With its Energy Star certification, the FMR-7036 is designed to operate with minimal energy consumption while delivering optimal performance.

Featuring a sleek stainless steel design, the FMR-7036 seamlessly integrates into any kitchen aesthetic. Its intuitive user interface includes a digital display and touch controls, allowing for easy navigation through various cooking functions. The appliance also comes with multiple cooking modes, including steam, grill, and bake, providing versatility for culinary experimentation.

Safety is a paramount consideration in the design of the FMR-7036. The appliance is equipped with an automatic shut-off feature, ensuring that users can cook with peace of mind. Additionally, the cool-touch exterior helps prevent burns, making it safe for families with children.

Cleaning the FMR-7036 is a breeze, thanks to its self-cleaning function. This feature utilizes high temperatures to burn off food residue, leaving the oven interior spotless without the need for harsh chemicals. The removable racks and smooth surfaces further facilitate easy cleaning.

Overall, the Bosch Appliances FMR-7036 combines style, functionality, and advanced cooking technologies, making it an ideal choice for both home chefs and everyday cooks. With its thoughtful design and innovative features, this appliance is poised to enhance any cooking experience, proving that Bosch continues to lead the market in quality and performance. Whether it’s preparing a weeknight dinner or a holiday feast, the FMR-7036 is a dependable kitchen companion that ensures delicious results every time.

FMR-7036 Fire Annunciator Keypad 7.0