Bosch Appliances 700 Scene too bright, Scene too dark, Scene too noisy, Reference Check

Page 53

AutoDome 700 Series IP PTZ Camera

Configuring the AutoDome 700 Series en 53

 

 

Global change

Activate this function if the global change, as set with the Global change slide control, should trigger an alarm.

Scene too bright

Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the lens) should trigger an alarm. The average brightness of the scene provides a basis for recognition.

Scene too dark

Activate this function if tampering associated with covering the lens (for instance, by spraying paint on it) should trigger an alarm. The average brightness of the scene provides a basis for recognition.

Scene too noisy

Activate this function if tampering associated with EMC interference (noisy scene as the result of a strong interference signal in the vicinity of the video lines), as an example, should trigger an alarm.

Reference Check

You can save a reference image that is continuously compared with the current video image. If the current video image in the marked areas differs from the reference image, an alarm is triggered. This allows you to detect tampering that would otherwise not be detected, for example if the camera is turned.

1.Click Reference to save the currently visible video image as a reference.

2.Click Select Area and select the areas in the reference image that are to be monitored.

3.Check the box Reference check to activate on-going matching. The stored reference image is displayed in black and white below the current video image, and the selected areas are marked in yellow.

4.Select the Disappearing edges or Appearing edges option to specify the reference check once again.

Disappearing edges

The area selected in the reference image should contain a prominent structure. If this structure is concealed or moved, the reference check triggers an alarm. If the selected area is too homogenous, so that concealing and moving the structure would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image.

Appearing edges

Select this option if the selected area of the reference image includes a largely homogenous surface. If structures appear in this area, then an alarm is triggered.

Select Area

You can select the image areas in the reference image that are to be monitored. The video image is subdivided into 858 square fields. Each of these fields can be activated or deactivated individually.

NOTICE!

Select only those areas for reference monitoring in which no movement takes place and that are always evenly lit, as false alarms could otherwise be triggered.

1.Click Select Area to configure the sensor fields. A new window will open.

2.If necessary, click Clear All first to clear the current selection (fields marked yellow).

3.Left-click the fields to be activated. Activated fields are marked yellow.

Bosch Security Systems, Inc.

User Manual

F.01U.273.798 3.0 2012.08

Image 53
Contents AutoDome 700 Series IP PTZ Camera Page Table of Contents VCA User Command Table Index Troubleshooting GuideSeconds and ends with a firmware version screen Powering OnEstablishing AutoDome Control System Requirements Overview of FeaturesInstallation manual Connecting the AutoDome 700 Series to the PCAutoDome 700 Series System Configuration Configuring the AutoDome 700 Series CameraUsing the AutoDome 700 Series Web Server Changing the Network SettingsUsing the Configuration Manager 1Intelligent Tracking Operation Configuring Intelligent TrackingGuidelines for Implementing Intelligent Tracking 6The LivepageProtected AutoDome 700 Series Maximum Number of ConnectionsProtected Network Image SelectionSystem Log / Event Log Digital I/OTriggering Relay To Enter a Keyboard Control Command Entering a Keyboard Control CommandTo Set a Preset Shot To View a Preset Shot15 Livepage Functions, Using Intelligent TrackingRecording Video Sequences Using Special FunctionsSaving Snapshots 9Processor Load Controlling playback Recordings01U.273.798 3.0 Bosch Security Systems, Inc Wire Specifications Audio Line Input SpecificationsConnections Activating Audio Reception5Configuring Gain optional Starting Configuration Basic Mode Device AccessNavigation Making ChangesBasic Mode Date/Time Basic Mode Encoder Basic Mode Network6Basic Mode Recording Basic Mode AudioAdvanced Mode General Basic Mode System OverviewPassword IdentificationDate format Date/TimeDevice date/Device time Device time zoneTime stamping Display StampingCamera name stamping Advanced Mode Web Interface Appearance Livepage Functions Logging Advanced Mode Camera Installer MenuEncoder Profile Profile name Video resolutionTarget data rate Maximum data rateEncoder Streams Privacy Masks White Balance Camera SettingsRed Gain Blue GainHigh Sensitivity Setting Shutter ModeNight Mode Maximum Gain LevelLens Settings PTZ Settings Preposition and Tours DiagnosticsTilt Limits CompassTo define and edit an individual scene SectorsTo define a preposition tour SectorMiscellaneous Advanced Mode Recording Storage ManagementLogs AudioDevice manager Activating and Configuring Storage MediaRecording media ISCSI MediaFormatting Storage Media Recording ProfilesDeactivating Storage Media Standard recordingRetention Time Recording Schedule Recording Status Advanced Mode Alarm Alarm ConnectionsRemote port Video transmissionVideo output DecoderAlarm status VCA configuration40 VCA Auto-connectMotion detector MOTION+ only Analysis typeSensitivity MOTION+ only Minimum object size MOTION+ onlySelect Area MOTION+ only Trigger delay sTamper detection SensitivityScene too dark Scene too brightScene too noisy Reference CheckAlarm E-Mail Audio AlarmAlarm Task Editor Relay Alarm RulesAdvanced Mode Interfaces Alarm Inputs 49.1 IPv4 Advanced Mode Network Network Access49.2 IPv6 Detailed SettingsEnable DynDNS Interface mode ETHRCP+ port Telnet supportAdvanced Multicast FTP Posting Encryption Advanced Mode Service Maintenance53 IPv4 Filter 01U.273.798 3.0 Bosch Security Systems, Inc System Overview LicensesUpload DownloadIf O.K., then If there is power to the AutoDome, then If O.K., then If using a non-Bosch power supplyVG5 AutoDome Operation and Control VG5 700 Series AutoDome Video and ControlConnection Problem Solution No NetworkAudio Connections with VG5 700 Series AutoDome VG5 Series AutoDome AudioProblem Solution No Audio Poor Audio Problem Solution If O.K., thenUser Command Table Index Igmp V2 TCP/IP 7 UDP Snmp Page Page Page Page Page Page Page Bosch Security Systems, Inc
Related manuals
Manual 32 pages 40.01 Kb Manual 32 pages 40.09 Kb Manual 120 pages 48.02 Kb

700 specifications

Bosch Appliances has long been synonymous with innovation and quality, and their 700 Series stands as a testament to this legacy. Designed to elevate the cooking experience, the Bosch Appliances 700 Series combines advanced technology with sleek aesthetics, making it a favored choice for modern kitchens.

One of the standout features of the 700 Series is its robust suite of cooking appliances, which includes wall ovens, cooktops, and microwaves. The wall ovens boast a European design that seamlessly fits into any kitchen decor. With a generous capacity, they allow for cooking large meals while ensuring even baking and roasting, thanks to the European Convection technology. This feature circulates hot air throughout the oven, ensuring perfectly cooked dishes every time.

The cooktops in the 700 Series are outfitted with precision burners, which provide instant heat adjustment, allowing for greater control and consistency in cooking. Whether you are simmering a delicate sauce or searing meat, the powerful burners provide the versatility needed for a wide range of culinary tasks. Bosch's induction cooktops also stand out for their energy efficiency and safety, as they heat cookware directly, leaving the surface cool to the touch.

Another notable characteristic of the 700 Series is its focus on smart technology. Many appliances in this series are equipped with Home Connect, which allows users to control their cooking experience remotely via a smartphone app. This feature enables you to preheat your oven or monitor cooking progress, ensuring convenience and flexibility in today’s fast-paced lifestyle.

The 700 Series also prioritizes ease of use and maintenance. The wall ovens come with self-cleaning options and easy-to-read LCD displays, simplifying the cooking process. Additionally, Bosch's attention to quiet operation means that you can enjoy your cooking experience without the distraction of unnecessary noise.

Overall, the Bosch Appliances 700 Series combines advanced technology, stylish design, and user-friendly features. Whether you're a home chef or a busy professional, this series offers the capabilities and elegance you need to elevate your culinary creations. With Bosch, you are not just buying an appliance; you are investing in a lifestyle of quality, efficiency, and innovation.