Bosch Appliances 700 user manual Alarm Rules, Advanced Mode Interfaces Alarm Inputs, Relay

Page 56

56 en Configuring the AutoDome 700 Series

AutoDome 700 Series IP PTZ Camera

 

 

2.Enter new scripts in the Alarm Task Editor field or change existing scripts in line with your requirements.

3.When you are finished, click the Set button to transmit the scripts to the unit. If the transfer was successful, the message Script successfully parsed is displayed over the text field. If it was not successful, an error message will be displayed with further information.

4.44Alarm Rules

The AutoDome 700 Series features an alarm rule engine. In its simplest form, an alarm rule can define which input(s) activate which output(s). Basically, an alarm rule allows you to customize an AutoDome 700 Series to automatically respond to different alarm inputs.

To configure an alarm rule specify one input from either a physical connection, a motion detection trigger, or from a connection to the camera’s Livepage. The physical input connection can be activated by dry contact devices such as pressure pads, door contacts and similar devices

Next, specify up to two (2) rule outputs, or the camera’s response to the input. Outputs include a physical alarm relay, an AUX command, or a preposition scene.

1.Click the Enabled check box to activate the alarm.

2.Choose one of the following alarm inputs:

Local Input 1: a physical alarm connection.

Local Input 2: a physical alarm connection.

IVA/MOTION+: an alarm when IVA or motion detection is activated.

Connection: an alarm when an attempt is made to access the camera’s IP address.

3.Choose one of the following output commands for both Output 1 and Output 2 settings:

None: no defined command.

Alarm Relay: defines a physical connection from the open collector alarm output.

Aux On: defines a standard or custom keyboard ON command.

Refer to Section 6 User Command Table, page 71, for a list of valid commands. Note: Only commands 1, 8, 18, 20, 43, 60, 80, 86 are supported. Support for the remaining commands is scheduled for a future release.

Aux Off: defines a standard or custom keyboard OFF command.

Refer to Section 6 User Command Table, page 71, for a list of valid commands. Note: Only commands 1, 8, 18, 20, 43, 60, 80, 86 are supported. Support for the remaining commands is scheduled for a future release.

Shot: defines a preset scene from shot 1-99.

4.Click Set to save and to activate the alarm rules.

4.45Advanced Mode: Interfaces

4.46Alarm Inputs

Select the type of input for each physical alarm. Select from either N.O. (Normally Open) or N.C. (Normally Closed) and provide an optional name for each input.

4.47Relay

The AutoDome 700 Series incorporates one (1) open collector alarm output. Use the following settings to configure the relay.

F.01U.273.798 3.0 2012.08

User Manual

Bosch Security Systems, Inc.

Image 56
Contents AutoDome 700 Series IP PTZ Camera Page Table of Contents VCA Troubleshooting Guide User Command Table IndexSeconds and ends with a firmware version screen Powering OnEstablishing AutoDome Control Overview of Features System RequirementsConnecting the AutoDome 700 Series to the PC Installation manualConfiguring the AutoDome 700 Series Camera AutoDome 700 Series System ConfigurationUsing the AutoDome 700 Series Web Server Changing the Network SettingsUsing the Configuration Manager Configuring Intelligent Tracking 1Intelligent Tracking Operation6The Livepage Guidelines for Implementing Intelligent TrackingMaximum Number of Connections Protected AutoDome 700 SeriesProtected Network Image SelectionSystem Log / Event Log Digital I/OTriggering Relay Entering a Keyboard Control Command To Enter a Keyboard Control CommandTo Set a Preset Shot To View a Preset ShotUsing Intelligent Tracking 15 Livepage Functions,Recording Video Sequences Using Special FunctionsSaving Snapshots 9Processor Load Recordings Controlling playback01U.273.798 3.0 Bosch Security Systems, Inc Audio Line Input Specifications Wire SpecificationsConnections Activating Audio Reception5Configuring Gain optional Basic Mode Device Access Starting ConfigurationNavigation Making ChangesBasic Mode Date/Time Basic Mode Network Basic Mode EncoderBasic Mode Audio 6Basic Mode RecordingBasic Mode System Overview Advanced Mode GeneralPassword IdentificationDate/Time Date formatDevice date/Device time Device time zoneTime stamping Display StampingCamera name stamping Advanced Mode Web Interface Appearance Livepage Functions Advanced Mode Camera Installer Menu LoggingEncoder Profile Video resolution Profile nameTarget data rate Maximum data rateEncoder Streams Privacy Masks Camera Settings White BalanceRed Gain Blue GainShutter Mode High Sensitivity SettingNight Mode Maximum Gain LevelLens Settings PTZ Settings Diagnostics Preposition and ToursTilt Limits CompassSectors To define and edit an individual sceneTo define a preposition tour SectorAdvanced Mode Recording Storage Management MiscellaneousLogs AudioActivating and Configuring Storage Media Device managerRecording media ISCSI MediaRecording Profiles Formatting Storage MediaDeactivating Storage Media Standard recordingRetention Time Recording Schedule Advanced Mode Alarm Alarm Connections Recording StatusVideo transmission Remote portVideo output DecoderVCA configuration Alarm status40 VCA Auto-connectAnalysis type Motion detector MOTION+ onlySensitivity MOTION+ only Minimum object size MOTION+ onlyTrigger delay s Select Area MOTION+ onlyTamper detection SensitivityScene too bright Scene too darkScene too noisy Reference CheckAudio Alarm Alarm E-MailAlarm Task Editor Relay Alarm RulesAdvanced Mode Interfaces Alarm Inputs Advanced Mode Network Network Access 49.1 IPv4Detailed Settings 49.2 IPv6Interface mode ETH Enable DynDNSRCP+ port Telnet supportAdvanced Multicast FTP Posting Encryption Advanced Mode Service Maintenance53 IPv4 Filter 01U.273.798 3.0 Bosch Security Systems, Inc Licenses System OverviewUpload DownloadIf O.K., then If using a non-Bosch power supply If O.K., then If there is power to the AutoDome, thenVG5 AutoDome Operation and Control VG5 700 Series AutoDome Video and ControlProblem Solution No Network ConnectionVG5 Series AutoDome Audio Audio Connections with VG5 700 Series AutoDomeProblem Solution No Audio Problem Solution If O.K., then Poor AudioUser Command Table Index Igmp V2 TCP/IP 7 UDP Snmp Page Page Page Page Page Page Page Bosch Security Systems, Inc
Related manuals
Manual 32 pages 40.01 Kb Manual 32 pages 40.09 Kb Manual 120 pages 48.02 Kb

700 specifications

Bosch Appliances has long been synonymous with innovation and quality, and their 700 Series stands as a testament to this legacy. Designed to elevate the cooking experience, the Bosch Appliances 700 Series combines advanced technology with sleek aesthetics, making it a favored choice for modern kitchens.

One of the standout features of the 700 Series is its robust suite of cooking appliances, which includes wall ovens, cooktops, and microwaves. The wall ovens boast a European design that seamlessly fits into any kitchen decor. With a generous capacity, they allow for cooking large meals while ensuring even baking and roasting, thanks to the European Convection technology. This feature circulates hot air throughout the oven, ensuring perfectly cooked dishes every time.

The cooktops in the 700 Series are outfitted with precision burners, which provide instant heat adjustment, allowing for greater control and consistency in cooking. Whether you are simmering a delicate sauce or searing meat, the powerful burners provide the versatility needed for a wide range of culinary tasks. Bosch's induction cooktops also stand out for their energy efficiency and safety, as they heat cookware directly, leaving the surface cool to the touch.

Another notable characteristic of the 700 Series is its focus on smart technology. Many appliances in this series are equipped with Home Connect, which allows users to control their cooking experience remotely via a smartphone app. This feature enables you to preheat your oven or monitor cooking progress, ensuring convenience and flexibility in today’s fast-paced lifestyle.

The 700 Series also prioritizes ease of use and maintenance. The wall ovens come with self-cleaning options and easy-to-read LCD displays, simplifying the cooking process. Additionally, Bosch's attention to quiet operation means that you can enjoy your cooking experience without the distraction of unnecessary noise.

Overall, the Bosch Appliances 700 Series combines advanced technology, stylish design, and user-friendly features. Whether you're a home chef or a busy professional, this series offers the capabilities and elegance you need to elevate your culinary creations. With Bosch, you are not just buying an appliance; you are investing in a lifestyle of quality, efficiency, and innovation.