Bosch Appliances 700 user manual Recording Status, Advanced Mode Alarm Alarm Connections

Page 48

48 en Configuring the AutoDome 700 Series

AutoDome 700 Series IP PTZ Camera

 

 

1.Click the Start button to activate the recording scheduler.

2.Click the Stop button to deactivate the recording scheduler. Running recordings are interrupted and the configuration can be changed.

Recording status

The graphic indicates the recording activity of the AutoDome 700 Series. You will see an animated graphic while recording is taking place.

4.37Recording Status

Certain details on the recording status are displayed here for information purposes. You cannot change any of these settings.

4.38Advanced Mode: Alarm

4.39Alarm Connections

You can select how the AutoDome 700 Series responds to an alarm. In the event of an alarm, the unit can automatically connect to a pre-defined IP address. You can enter up to ten IP addresses to which the AutoDome 700 Series will connect in sequence in the event of an alarm, until a connection is made.

Connect on alarm

Select On so that the AutoDome 700 Series automatically connects to a predefined IP address in the event of an alarm.

By setting Follows input 1 the unit maintains the connection that has been automatically established for as long as an alarm exists on alarm input 1.

NOTICE!

In the default setting, Stream 2 is transmitted for alarm connections. Bear this fact in mind when assigning the profile (see Section 4.19 Encoder Profile, page 33).

Number of destination IP address

Specify the numbers of the IP addresses to be contacted in the event of an alarm. The unit contacts the remote stations one after the other in the numbered sequence until a connection is made.

Destination IP address

For each number, enter the corresponding IP address for the desired remote station.

Destination password

If the remote station is password protected, enter the password here.

In this page, you can save a maximum of ten destination IP addresses and hence up to ten passwords for connecting to remote stations. If connections to more than ten remote stations are to be possible, for example when initiating connections via higher-ranking systems such as VIDOS or Bosch Video Management System, you can store a general password here. The AutoDome 700 Series can use this general password to connect to all remote stations protected with the same password. In this case, proceed as follows:

1.Select 10 from the Number of destination IP address list field.

2.Enter the address 0.0.0.0 in the Destination IP address field.

3.Enter your chosen password in the Destination password field.

4.Define this password as the user password for all remote stations to which a connection is to be possible.

F.01U.273.798 3.0 2012.08

User Manual

Bosch Security Systems, Inc.

Image 48
Contents AutoDome 700 Series IP PTZ Camera Page Table of Contents VCA Troubleshooting Guide User Command Table IndexPowering On Establishing AutoDome ControlSeconds and ends with a firmware version screen Overview of Features System RequirementsConnecting the AutoDome 700 Series to the PC Installation manualConfiguring the AutoDome 700 Series Camera AutoDome 700 Series System ConfigurationChanging the Network Settings Using the Configuration ManagerUsing the AutoDome 700 Series Web Server Configuring Intelligent Tracking 1Intelligent Tracking Operation6The Livepage Guidelines for Implementing Intelligent TrackingMaximum Number of Connections Protected AutoDome 700 SeriesProtected Network Image SelectionDigital I/O Triggering RelaySystem Log / Event Log Entering a Keyboard Control Command To Enter a Keyboard Control CommandTo Set a Preset Shot To View a Preset ShotUsing Intelligent Tracking 15 Livepage Functions,Using Special Functions Saving SnapshotsRecording Video Sequences 9Processor Load Recordings Controlling playback01U.273.798 3.0 Bosch Security Systems, Inc Audio Line Input Specifications Wire SpecificationsConnections Activating Audio Reception5Configuring Gain optional Basic Mode Device Access Starting ConfigurationNavigation Making ChangesBasic Mode Date/Time Basic Mode Network Basic Mode EncoderBasic Mode Audio 6Basic Mode RecordingBasic Mode System Overview Advanced Mode GeneralPassword IdentificationDate/Time Date formatDevice date/Device time Device time zoneDisplay Stamping Camera name stampingTime stamping Advanced Mode Web Interface Appearance Livepage Functions Advanced Mode Camera Installer Menu LoggingEncoder Profile Video resolution Profile nameTarget data rate Maximum data rateEncoder Streams Privacy Masks Camera Settings White BalanceRed Gain Blue GainShutter Mode High Sensitivity SettingNight Mode Maximum Gain LevelLens Settings PTZ Settings Diagnostics Preposition and ToursTilt Limits CompassSectors To define and edit an individual sceneTo define a preposition tour SectorAdvanced Mode Recording Storage Management MiscellaneousLogs AudioActivating and Configuring Storage Media Device managerRecording media ISCSI MediaRecording Profiles Formatting Storage MediaDeactivating Storage Media Standard recordingRetention Time Recording Schedule Advanced Mode Alarm Alarm Connections Recording StatusVideo transmission Remote portVideo output DecoderVCA configuration Alarm status40 VCA Auto-connectAnalysis type Motion detector MOTION+ onlySensitivity MOTION+ only Minimum object size MOTION+ onlyTrigger delay s Select Area MOTION+ onlyTamper detection SensitivityScene too bright Scene too darkScene too noisy Reference CheckAudio Alarm Alarm E-MailAlarm Task Editor Alarm Rules Advanced Mode Interfaces Alarm InputsRelay Advanced Mode Network Network Access 49.1 IPv4Detailed Settings 49.2 IPv6Interface mode ETH Enable DynDNSRCP+ port Telnet supportAdvanced Multicast FTP Posting Advanced Mode Service Maintenance 53 IPv4 FilterEncryption 01U.273.798 3.0 Bosch Security Systems, Inc Licenses System OverviewUpload DownloadIf O.K., then If using a non-Bosch power supply If O.K., then If there is power to the AutoDome, thenVG5 AutoDome Operation and Control VG5 700 Series AutoDome Video and ControlProblem Solution No Network ConnectionVG5 Series AutoDome Audio Audio Connections with VG5 700 Series AutoDomeProblem Solution No Audio Problem Solution If O.K., then Poor AudioUser Command Table Index Igmp V2 TCP/IP 7 UDP Snmp Page Page Page Page Page Page Page Bosch Security Systems, Inc
Related manuals
Manual 32 pages 40.01 Kb Manual 32 pages 40.09 Kb Manual 120 pages 48.02 Kb

700 specifications

Bosch Appliances has long been synonymous with innovation and quality, and their 700 Series stands as a testament to this legacy. Designed to elevate the cooking experience, the Bosch Appliances 700 Series combines advanced technology with sleek aesthetics, making it a favored choice for modern kitchens.

One of the standout features of the 700 Series is its robust suite of cooking appliances, which includes wall ovens, cooktops, and microwaves. The wall ovens boast a European design that seamlessly fits into any kitchen decor. With a generous capacity, they allow for cooking large meals while ensuring even baking and roasting, thanks to the European Convection technology. This feature circulates hot air throughout the oven, ensuring perfectly cooked dishes every time.

The cooktops in the 700 Series are outfitted with precision burners, which provide instant heat adjustment, allowing for greater control and consistency in cooking. Whether you are simmering a delicate sauce or searing meat, the powerful burners provide the versatility needed for a wide range of culinary tasks. Bosch's induction cooktops also stand out for their energy efficiency and safety, as they heat cookware directly, leaving the surface cool to the touch.

Another notable characteristic of the 700 Series is its focus on smart technology. Many appliances in this series are equipped with Home Connect, which allows users to control their cooking experience remotely via a smartphone app. This feature enables you to preheat your oven or monitor cooking progress, ensuring convenience and flexibility in today’s fast-paced lifestyle.

The 700 Series also prioritizes ease of use and maintenance. The wall ovens come with self-cleaning options and easy-to-read LCD displays, simplifying the cooking process. Additionally, Bosch's attention to quiet operation means that you can enjoy your cooking experience without the distraction of unnecessary noise.

Overall, the Bosch Appliances 700 Series combines advanced technology, stylish design, and user-friendly features. Whether you're a home chef or a busy professional, this series offers the capabilities and elegance you need to elevate your culinary creations. With Bosch, you are not just buying an appliance; you are investing in a lifestyle of quality, efficiency, and innovation.