BEA Eagle HM dimensions Mechanical Adjustments Setting Sensing Field Dimensions, Cont

MECHANICAL
ADJUSTMENTS -
SETTING THE
SENSING FIELD
DIMENSIONS –	70º
Cont.

For ceiling mounting, the vertical tilt angle of the antenna must be set at the maximum position of 70-75°and the spherical part of the sensor must be oriented in the opposite direction to the door.

C.THE LATERAL POSITION OF THE SENSING FIELD IN FRONT OF THE DOOR IS DETERMINED BY THE LATERAL TILT ANGLE OF THE ANTENNA.

		The sensing fields on the right
		correspond to the
		following adjustments :
		lateral angle of the
		antenna : 15°, -15° ;
		sensitivity : 6 (middle),
		9 (max.)
		Mounting height : 16’
-15º	+15º	20° Angle

6.4’ 3.2’ 0 3.2’ 6.4’

S=6

S=9

0

3.2

6.4

9.6’

12.8’

16’

D. THE DIMENSIONS (WIDTH, DEPTH_OF THE SENSING FIELD DEPEND ON THE SENSITIVITY SETTING.

The sensing fields on the right correspond to the following adjustments :

vertical angle of the antenna : 20° Mounting height :16’

6.4’ 3.2’ 0 3.2’ 6.4’

0

3.2’

6.4’

9.6’

75.1038 V3 Jun 2005 [Rev. June 10, 2005] Page 4 of 8