Resetting the patron counter
To keep track of the total count, record the number on the patron counter before resetting the detection system.
To reset the patron counter:
1Locate the reset button access hole on the outside of Panel A.
2Straighten a small paperclip.
3Gently push the paperclip straight into the access hole approximately 1 in. (2.5 cm) until the reset button clicks, and then remove the paperclip.
There is a guide within the access hole that directs the paperclip to the reset button.
4Confirm that the patron counter is reset to zero.
If the software version is displayed, press the reset button twice in succession to clear the screen.
Access Hole
8800_OM_003
Panel A
Figure 3. Locate reset button access hole.
Figure 4. Press reset button with paperclip.
9