How to Remote Start Your Vehicle

Remote Start Operation

Warnings

As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of.

1.Keep the transmitter out of reach of children.

2.DO NOT leave anyone in the vehicle while running on remote control.

3.Alert any service personal that the vehicle can be started automatically.

4.DO NOT start the vehicle by remote while it’s in an enclosed area or garage.

5.Always apply the parking brake and lock the vehicle as you exit the vehicle.

6.Should the unit malfunction, disconnect the fuse until the problem is corrected.

7.The use and operations of this security system is the sole responsibility of the owner/operator of the vehicle

8.Some areas may have local ordinances that prohibit leaving a vehicle running on public streets. Check your local laws and ordinances.

1.Press the button twice on the transmitter for about 1 second.

2.The parking lights will activate to indicate the remote start signal has been received.

3.The engine will start in approximately 5 seconds.

4.Once the engine is running, after 11 seconds the parking lights will turn on again and climate controls will activate and adjust the vehicle’s interior temperature to your preset setting.

5.The vehicle will run for 5 to 30 minute cycle and automatically shut down Note: The remote start unit will not start the vehicle if any one of the following conditions exists:

1.The Hood is open

2.The Brake Pedal is Pressed

3.Move the Optional Remote Start Enable Switch to “OFF” Position (If Installed)

4.The Gear Selector is in any Gear other than “Park” or “Neutral”

How to Operate the Vehicle While Running on the Remote Start Function

1.Insert the ignition key and turn it to the “ON” Position. Be sure you DO NOT turn the Ignition key all the way to the “Start” position. This will cause severe damage to all the starter components on your vehicle.

2.Press the brake pedal.

Note: If the brake pedal is pressed before the key is in the “ON” position, the engine will automatically shut down

Temporary Stop Feature

This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time but, would like to leave the motor running and climate control on.

1.Before turning off the engine, press the button twice on the transmitter and the LED indicator will flash 3 times to confirm mode entry.

2.Turn the ignition key to “OFF” position (The engine will stay running)

3.The engine will run until the pre-programmed time elapsed or shutdown input is received.

M7a specifications

The Magnadyne M7A is a high-performance multimedia receiver designed for automotive applications, offering an impressive blend of advanced technologies and user-friendly features. This cutting-edge device is tailored to enhance the driving experience while ensuring seamless connectivity and entertainment on the go.

One of the standout features of the Magnadyne M7A is its high-resolution touchscreen display. The 7-inch screen provides vibrant visuals and an intuitive interface for users to navigate through various apps and functions easily. This display supports multi-touch gestures, allowing for gestures such as pinch-to-zoom and swipe, making it not only visually appealing but also extremely functional in managing multimedia content.

Connectivity is a primary focus of the M7A, with support for both Bluetooth and USB interfaces. The Bluetooth functionality allows users to easily pair their smartphones, enabling hands-free calling and audio streaming. This ensures that drivers can stay focused on the road while enjoying their favorite playlists or podcasts without compromising safety. Additionally, the USB interface facilitates quick access to media files and offers quick charging capabilities for smartphones, making it an essential feature for modern users.

Incorporating modern navigation technology, the Magnadyne M7A is compatible with various GPS applications, offering real-time directions and traffic updates. This feature enhances driving convenience and reduces the likelihood of getting lost during journeys. Moreover, it supports navigation apps that can be directly displayed on the large screen, ensuring that users have access to turn-by-turn directions without distractions.

Audio quality is another hallmark of the M7A, which is equipped with built-in amplifiers and customizable equalizers. These features allow users to fine-tune their audio experience according to their preferences, whether they favor deep bass tones or crisp treble sounds. With support for multiple audio formats, including High-Resolution Audio, the M7A ensures that music playback remains rich and immersive.

The device also prioritizes safety with its compatibility for backup cameras and parking assist. Users can easily connect these systems, enhancing visibility while reversing and increasing overall safety during driving.

In summary, the Magnadyne M7A stands out as a full-featured multimedia receiver that combines advanced technology with user-centric design. From its vibrant touchscreen display to robust connectivity options and enhanced audio capabilities, it caters to the diverse needs of modern drivers while ensuring a safer and more enjoyable driving experience.