Digital Multiplexer SDM-090(P)
When desiring to see the stop screen
The monitor screen (full screen and division) may be seen with a temporary stop.
A desired screen may be temporarily stopped selectively in the division screen indication mode.
1. FREEZE setting of FULL screen
The LED turns on and monitor image stops and “FREEZE” character is indicated on the screen if pressing the “FREEZE” button in the FULL screen mode. The LED turns off and the stop mode is released if pressing the “FREEZE” button once again.
2. FREEZE setting of division screen
The LED blinks if pressing the “FREEZE” button. The selected screen stops if selecting a channel to freeze, and “F” character is displayed. The selected channel is released if pressing the relevant channel again and stop of all channels if pressing the “FREEZE” button.
01/05/01 12:30:26 | 01/05/01 12:30:26 | ||
| F |
| |
| CH1 | CH2 | |
| Flash |
| |
FREEZE |
|
| |
CH1 |
| F | |
CH3 | CH4 | ||
| |||
FULL screen | |||
➢The “FREEZE” button does not operate in the following cases:
-In setting division screen mode
-In setting of program mode
-In displaying ALARM/LOSS LIST on screen
