Reset/Erase, List, Menu, Enter, Set, Sequence | Samsung SDM-090P

Digital Multiplexer SDM-090(P)

D. ALARM

-RESET/ERASE

Button for deactivating ALARM. When ALARM is input, RESET/ERASE Button should illuminate.

When “ALARM/LOSS LIST” is displayed on the screen, pressing this Button will erase page by page.

-LIST

Shows ALARM/LOSS LIST.

E. SETUP/FUNCTION

-MENU

Pressing this Button will make LED lit, and MAIN MENU appears on the screen.

-ENTER

Used when switching from MAIN MENU to SUB MENU.

-SET

This function is used when moving from SUB MENU to MAIN MENU after setting programs on each MENU screen, or is used when setting each channel for multi- screen. When setting channels for multi-screen, the channel number flashes.

-SEQUENCE

When pressing this Button, each Channel will automatically be switched to the next channel sequentially with some time intervals, and LED should illuminate. Pressing again will stop illuminating, and stops sequencing.

-FREEZE

When pressing this Button, selected screen becomes still, and LED should illuminate.

- ZOOM

When pressing this Button, the screen should enlarge. Pressing once enlarges twice, and another pressing enlarges 4 times, and pressing once again will bring the screen back to normal.

F. MOVE ( ,	,	→	,→ )
→	→	→

This function is used when setting Program Menu, Channel of Multi-screen, and Zoom Mode, and also when moving Cursor.

1-4

Image 14

Samsung SDM-090P, SDM-090MP manual Reset/Erase, List, Menu, Enter, Set, Sequence, Freeze, Zoom

Contents

Digital Multiplexer Digital Multiplexer SDM 090P Do Not Expose This Equipment To Rain or Moisture Important Safeguards Digital Multiplexer SDM-090P Digital Multiplexer SDM-090P Contents Viii Occurrence and Handling of Alarm Chapter Introduction IntroductionPage REC Check Name of parts and FunctionMulti Screen Triplex Menu RESET/ERASEList Enter Rear Panel VCR IN/OUT BNC Installation Preparing for the Installation Physical & Environmental Precautions when Installing 15Cm Digital Multiplexer SDM-090P Unpacking Connecting to Other Devices Connecting to Other Devices Connecting to normal VCR and Monitor Connecting to S-VHS VCR and S-VHS Monitor Connecting to Time Lapse VCR Connecting to Alarm Sensor PIN Number Remote Control by connecting to PC2TXDTRANSMITTEDDATA 3RXDRECEIVEDDATA 5SGSIGNALGROUND CH1 CH2 CH3 Multi Screen REC CHECK/PB Through LIVE/PB Triplex PIP ResetAscii CH4 CH5 CH6 CH7 CH8 CH9 Chapter Change it to a desiring indication mode Turn on power switchSetup a recording channel Initial operation When desiring to see in the Full screen When desiring to see in the live screen/replay screenWhen desiring to see in the Triplex screen When desiring to see in the division screen When desiring to see automatic sequential conversion screen When desiring to see the stop screen Freeze setting of Full screen Full Mode When desiring to see in the zoom screenWhen desiring to see in the PIP screen When desiring to see in the record screen When desiring to see output of VCR as it is Setting of Program Menu Duty SET Reservation OFF Record setting of each cameraREC OUT SET REC Type TLV REC Type NOR ↔ TLV REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 Setting of display mode PB Display ALL Spot OUT Cvbs PIP Size Sequence Loss Detect Loss Info Alarm InfoALL Alarm S/W Time Sequence CH1 02 CH2 CH3 02 CH4 CH5 02 CH6 CH7 02 CH8 CH9 Setting of title by channel Title SET DATE/TIME SET Display Type YY/MM/DD MM/DD/YY DD/MM/YY 01/04/01 123001 YY/MM/DD Hhmmss REC Type NOR Alarm Input OFF Setting of alarmAlarm SET Hold Time REC Type NOR ↔ TL Alarm Buzzer OFF Loss Buzzer Summer Time System settingPassword Change System SET Baud Rate Password Change Password Check NEW Password Confirm +++++++++++++++++ + - - - - + Recording Digital Multiplexer SDM-090P Normal record mode Frame Time Lapse record mode Weight value REC Duty record REC Duty Alarm weight value recordReservation record Alarm, loss Digital Multiplexer SDM-090P Alarm record Alarm occurrence conditionsAlarm release Screen conversion Alarm signal standard VCR Trig Alarm/Loss list reference ALARM/LOSS List YY/MM/DD Hhmmss Operation in video loss Appendix a Appendix a Specifications Auto Switcher Outside Drawing Appendix B Appendix B Checking points in trouble When S-VHS record is not performed