Digital Multiplexer
-The following is displayed if pressing the “ENTER” button with the blinking position placed at the “SPOT OUT...”:
[SPOT OUT]
CH1 : 02 CH2 : 00
CH3 : 00 CH4 : 00
CH5 : 00 CH6 : 00
CH7 : 00 CH8 : 00
CH9 : 00
ALARM S/W TIME : 02
¥You can set the sequence time of SPOT output.
¥The blinking indication moves if pressing “→”, “→” button.
¥ The setting value is changed if pressing “ → ”, “ →” button. CH1~CH9 : 0 to 30 seconds.
Alarm S/W TIME : 01 to 30 seconds.
¥The changed setting value is stored if pressing the “SET” button and you can return to the “MON OUT SET” menu.
✴The channel of LOSS or “ 0 ” of sequence time will be skipped in the SPOT output sequence.
✴SPOT OUTPUT on alarm
When the alarm is activated, only the alarmed channel will be output. On single alarm : output only the alarmed channel.
On multiple alarms : output alarmed channels in turn at intervals of set ALARM S/W TIME.
(Even the sequence time of the alarmed channel is set as “ 0 ” then will be SPOT
output.)
