Digital Multiplexer
-The following is displayed if pressing the “ENTENR” button with the blinking position placed at “SEQUENCE….”:
[SEQUENCE]
CH1 : 02 CH2 : 02
CH3 : 02 CH4 : 02
CH5 : 02 CH6 : 02
CH7 : 02 CH8 : 02
CH9 : 02
¥Set the indication time (second) of each channel in the automatic conversion mode.
¥The blinking indication moves if pressing “→”, “ →” button.
¥The setting value is changed if pressing “→”, “→” button.
CH1 ~ CH 9 : 0 ~ 30
“0” is skipped irrespective of existence of channel loss in the automatic conversion mode.
¥The changed setting value is stored if pressing the “SET” button and you can return to the “MON OUT SET” menu.
-The following screen is displayed if pressing the “ENTER” button with the blinking position placed at the “LOSS DETECT….”:
[LOSS DETECT]
CH1 : ON CH2 : ON
CH3 : ON CH4 : ON
CH5 : ON CH6 : ON
CH7 : ON CH8 : ON
CH9 : ON
¥Set whether LOSS DETECT by channel will be done.
¥The blinking indication moves if pressing “→”, “ →” button.
¥ The setting value is changed if pressing “→”, “→” button. : ON ↔ OFF
¥The changed setting value is stored if pressing the “SET” button and you can return to
the “MON OUT SET” menu.
