Digital Multiplexer
- The blinking indication moves if pressing “→”, “ →” button.
-The setting value is changed if pressing “→”, “→” button.
-The changed setting value is stored if pressing the “SET” button. You can return to the main menu.
REC TYPE : NOR ↔ TLV
¥NOR : Used when connecting general VCR. Output is done in Field or Frame.
¥TLV : Used when recording in the TLV mode by connecting the time lapse VCR.
-Output in the normal mode if no trigger signal exists though the setting is done in the TLV mode.
REC OUT : FIELD ↔ FRAME : Effective menu if “REC TYPE” is “NOR”.
¥FIELD : Output in 1/60 second (NTSC), 1/50 second (PAL)
¥FRAME: Output in 1/30 second (NTSC), 1/25 second (PAL)
-Reservation : ON ↔ OFF
-The following screen is displayed if pressing the “ENTER” button with the blinking position placed at the “DUTY SET ….”.
[REC DUTY SET]
CH1 | : 1 | CH2 | : 1 | ||
CH3 | : 1 | CH4 | : 1 | ||
CH5 | : 1 | CH6 | : | 1 | |
CH7 | : | 1 | CH8 | : | 1 |
CH9 | : | 1 |
|
|
|
¥The blinking indication moves if pressing “→”, “ →” button.
¥ The setting value is changed if pressing “→”, “ →” button:OFF,1~5.
¥The relevant channel is not recorded if the setting value is “OFF”.
¥The changed setting value is stored if pressing the “SET” button. You can return to
the main menu.
