Record setting of each camera | Samsung SDM-090MP, SDM-090P guide

Digital Multiplexer SDM-090(P)

Chapter 5. Setting of Program Menu

<MAIN MENU>

The following main menu is displayed on the monitor screen if pressing “MENU” button, the “MENU” LED turns on. The LED turns off if pressing the button and it returns to the previous status.

[SETUP MENU]

1.REC OUT SET

2.MON OUT SET

3.CHANNEL TITLE SET

4.DATE / TIME SET

5.ALARM SET

6.SYSTEM SET

<SUB MENU>

- Select item 1~6 of the main menu using the “MOVE” button (→, →). - Press the “ENTER” button to move to the sub-menu.

1. Record setting of each camera

You can set record mode and record duty, ON/OFF, reservation of each channel. The following screen is displayed on screen if pressing the “ENTER” button after placing the blinking indication on the “1. REC OUT SET” by pressing the “MOVE” button from the main menu.

[REC OUT SET]

REC TYPE	TLV
REC OUT	FIELD
DUTY SET...
RESERVATION	OFF

5-1

Image 39

Samsung SDM-090MP, SDM-090P manual Record setting of each camera, REC OUT SET REC Type TLV, Duty SET Reservation OFF

Contents

Digital Multiplexer Digital Multiplexer SDM 090P Do Not Expose This Equipment To Rain or Moisture Important Safeguards Digital Multiplexer SDM-090P Digital Multiplexer SDM-090P Contents Viii Occurrence and Handling of Alarm Chapter Introduction IntroductionPage Triplex Name of parts and FunctionMulti Screen REC Check Enter RESET/ERASEList Menu Rear Panel VCR IN/OUT BNC Installation Physical & Environmental Preparing for the Installation Precautions when Installing 15Cm Digital Multiplexer SDM-090P Unpacking Connecting to Other Devices Connecting to normal VCR and Monitor Connecting to Other Devices Connecting to S-VHS VCR and S-VHS Monitor Connecting to Time Lapse VCR Connecting to Alarm Sensor Remote Control by connecting to PC 2TXDTRANSMITTEDDATA 3RXDRECEIVEDDATA 5SGSIGNALGROUNDPIN Number CH4 CH5 CH6 CH7 CH8 CH9 Multi Screen REC CHECK/PB Through LIVE/PB Triplex PIP ResetAscii CH1 CH2 CH3 Chapter Initial operation Turn on power switchSetup a recording channel Change it to a desiring indication mode When desiring to see in the live screen/replay screen When desiring to see in the Triplex screenWhen desiring to see in the Full screen When desiring to see in the division screen When desiring to see automatic sequential conversion screen Freeze setting of Full screen When desiring to see the stop screen When desiring to see in the zoom screen When desiring to see in the PIP screenFull Mode When desiring to see output of VCR as it is When desiring to see in the record screen Setting of Program Menu Record setting of each camera REC OUT SET REC Type TLVDuty SET Reservation OFF REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 REC Type NOR ↔ TLV Setting of display mode Sequence Loss Detect Loss Info Alarm Info ALLPB Display ALL Spot OUT Cvbs PIP Size Alarm S/W Time CH1 02 CH2 CH3 02 CH4 CH5 02 CH6 CH7 02 CH8 CH9 Sequence Title SET Setting of title by channel YY/MM/DD MM/DD/YY DD/MM/YY 01/04/01 123001 YY/MM/DD Hhmmss DATE/TIME SET Display Type REC Type NOR ↔ TL Setting of alarmAlarm SET Hold Time REC Type NOR Alarm Input OFF System SET Baud Rate System settingPassword Change Alarm Buzzer OFF Loss Buzzer Summer Time Password Change Password Check NEW Password Confirm +++++++++++++++++ + - - - - + Recording Digital Multiplexer SDM-090P Frame Normal record mode Weight value REC Duty record Time Lapse record mode Alarm weight value record Reservation recordREC Duty Alarm, loss Digital Multiplexer SDM-090P Screen conversion Alarm occurrence conditionsAlarm release Alarm record VCR Trig Alarm signal standard ALARM/LOSS List YY/MM/DD Hhmmss Alarm/Loss list reference Operation in video loss Appendix a Appendix a Specifications Auto Switcher Outside Drawing Appendix B Appendix B Checking points in trouble When S-VHS record is not performed