Normal record mode, Frame | Samsung SDM-090MP, SDM-090P specs

Digital Multiplexer SDM-090(P)

Chapter 6. Recording

1. Normal record mode

When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “NOR”.

(1)Frame record

-When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to

FRAME.

-The image signal entered from the maximum 9 cameras is output in Frame and recorded on the VCR.

-The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to more than 1.

1/30sec(NTSC), 1/25(PAL)

VCR TAPE 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1

(2)Field record

-When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “FIELD”.

-The image signal entered from the maximum 9 cameras is output in Field and recorded on the VCR.

-The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to more than 1.

1/60sec(NTSC), 1/50(PAL)

VCR TAPE 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1

6-1

Image 53

Samsung SDM-090MP, SDM-090P manual Normal record mode, Frame

Contents

Digital Multiplexer Digital Multiplexer SDM 090P Do Not Expose This Equipment To Rain or Moisture Important Safeguards Digital Multiplexer SDM-090P Digital Multiplexer SDM-090P Contents Viii Occurrence and Handling of Alarm Chapter Introduction IntroductionPage Multi Screen Name of parts and FunctionREC Check Triplex List RESET/ERASEMenu Enter Rear Panel VCR IN/OUT BNC Installation Physical & Environmental Preparing for the Installation Precautions when Installing 15Cm Digital Multiplexer SDM-090P Unpacking Connecting to Other Devices Connecting to normal VCR and Monitor Connecting to Other Devices Connecting to S-VHS VCR and S-VHS Monitor Connecting to Time Lapse VCR Connecting to Alarm Sensor PIN Number Remote Control by connecting to PC2TXDTRANSMITTEDDATA 3RXDRECEIVEDDATA 5SGSIGNALGROUND Ascii Multi Screen REC CHECK/PB Through LIVE/PB Triplex PIP ResetCH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 Chapter Setup a recording channel Turn on power switchChange it to a desiring indication mode Initial operation When desiring to see in the Full screen When desiring to see in the live screen/replay screenWhen desiring to see in the Triplex screen When desiring to see in the division screen When desiring to see automatic sequential conversion screen Freeze setting of Full screen When desiring to see the stop screen Full Mode When desiring to see in the zoom screenWhen desiring to see in the PIP screen When desiring to see output of VCR as it is When desiring to see in the record screen Setting of Program Menu Duty SET Reservation OFF Record setting of each cameraREC OUT SET REC Type TLV REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 REC Type NOR ↔ TLV Setting of display mode PB Display ALL Spot OUT Cvbs PIP Size Sequence Loss Detect Loss Info Alarm InfoALL Alarm S/W Time CH1 02 CH2 CH3 02 CH4 CH5 02 CH6 CH7 02 CH8 CH9 Sequence Title SET Setting of title by channel YY/MM/DD MM/DD/YY DD/MM/YY 01/04/01 123001 YY/MM/DD Hhmmss DATE/TIME SET Display Type Alarm SET Hold Time Setting of alarmREC Type NOR Alarm Input OFF REC Type NOR ↔ TL Password Change System settingAlarm Buzzer OFF Loss Buzzer Summer Time System SET Baud Rate Password Change Password Check NEW Password Confirm +++++++++++++++++ + - - - - + Recording Digital Multiplexer SDM-090P Frame Normal record mode Weight value REC Duty record Time Lapse record mode REC Duty Alarm weight value recordReservation record Alarm, loss Digital Multiplexer SDM-090P Alarm release Alarm occurrence conditionsAlarm record Screen conversion VCR Trig Alarm signal standard ALARM/LOSS List YY/MM/DD Hhmmss Alarm/Loss list reference Operation in video loss Appendix a Appendix a Specifications Auto Switcher Outside Drawing Appendix B Appendix B Checking points in trouble When S-VHS record is not performed