Universal Security Instruments MICN102L, MICN109L HOW can I Protect MY Family from CO POISONING?

Page 14

The following conditions can result in transient CO situations:

1.Excessive spillage or reverse venting of fuel-burning appliances caused by outdoor ambient conditions, such as:

•Wind direction and/or velocity, including high gusts of wind. Heavy air in the vent pipes (cold/ humid air with extended periods between cycles).

•Negative pressure differential resulting from the use of exhaust fans.

•Simultaneous operation of several fuel-burning appliances competing for limited internal air.

•Vent pipe connections vibrating loose from clothes dryers, furnaces or water heaters.

•Obstructions in or unconventional vent pipe designs which can amplify the above situations.

2.Extended operation of unvented fuel-burning devices (ranges, ovens, fireplaces).

3.Temperature inversions which can trap exhaust close to the ground.

4.A car idling in an open or closed attached garage or near a home.

HOW CAN I PROTECT MY FAMILY FROM CO POISONING?

This alarm is an excellent means of protection. It monitors the air and sounds a loud alarm before carbon monoxide levels become threatening to the average, healthy adult.

An alarm is not a substitute for proper maintenance of home appliances.

To help prevent CO problems and reduce the risk of CO poisoning:

•Clean chimneys and flues yearly. Keep them free of debris, leaves and nests for proper air flow. Also, have a professional check for rust and corrosion, cracks or separations. These conditions can prevent proper air movement and cause backdrafting. Never "cap" or cover a chimney in any way that would block air flow.

•Test and maintain all fuel-burning equipment annually. Many local gas or oil companies and HVAC companies offer appliance inspections for a nominal fee.

•Make regular visual inspections of all fuel-burning appliances. Check appliances for excessive rust and scaling. Also check the flame on the burner and pilot lights. The flame should be blue. A yellow flame means fuel is not being burned completely and CO may be present. Keep the blower door on the furnace closed. Use vents or fans when they are available on all fuel-burning appliances. Make sure appliances are vented to the outside. Do not grill or barbecue indoors or in garages or screen porches.

•Check for exhaust backflow from CO sources. Check the draft hood on an operating furnace for a backdraft. Look for cracks on furnace heat exchangers.

•Check the house or garage on the other side of a shared wall.

•Keep windows and doors open slightly. If you suspect that CO is escaping into your home, open a window or a door. Opening windows and doors can significantly decrease CO levels.

REPAIRS AND SERVICES

If the smoke alarm is defective in any way, do not tamper with the smoke alarm. Return the alarm for servicing. (See warranty for instructions or in-warranty returns.) There will be a service charge for repairing out of warranty alarms.

DEVELOP AND PRACTICE A PLAN OF ESCAPE BASICS OF ESCAPE PLAN

o Make a floor plan indicating all doors and windows and at least two escape routes from each room. Second story windows may need a rope or chain ladder.

oHave a family meeting and discuss your escape plan, showing everyone what to do in case of fire. o Determine a place outside your home where all of you can meet if a fire occurs.

o Familiarize everyone with the sound of the smoke alarm and train them to leave your home when they hear the sound.

o Identify children's bedrooms with red stickers placed in the upper left corner of the windows. They are available from your local fire department.

o Practice a fire drill at least every six months. Practice allows you to test your plan before an emergency. You may not be able to reach your children. It is important they know what to do!

Page 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Table of Contents Alarm Limitations and Functions What YOU should Know about Natural GAS Where this Alarm should be InstalledWhat YOU should Know about CO Page Basic Safety Information Where YOU can Hear the Alarm from ALL Sleeping AreasPage Electrical Shock Hazard Do not Tamper with Wires When Power is on Wiring InstructionsWires from Quick Connectorconnect to OPERATION, Testing & Maintenance What to do if Carbon Monoxide is Detected If Your CO and GAS Alarm SoundsIf the CO Alarm Sounds Using the Silence Feature What to do if Natural GAS is DetectedUtha Maintenance Regular MaintenanceWeekly Testing Using the Test FeatureCO and Natural GAS Alarm Limitations Potential Sources of CO in the HomeDevelop and Practice a Plan of Escape Basics of Escape Plan Repairs and ServicesHOW can I Protect MY Family from CO POISONING? What to do When the Alarm Sounds FCC Part 15 Radio Frequency DevicesOperational Summary RecommendationAlarm Returns TEN Year Lithium Battery Limited WarrantyUltralife 9 Volt Battery Returns

MICN109, MICN109L, MICN102, MICN102L specifications

Universal Security Instruments offers a versatile lineup of carbon monoxide and smoke detectors that provide essential safety features for any home or office environment. Among their popular models are the MICN102, MICN109L, MICN109, and MICN102L, each designed with advanced technology to ensure effective monitoring and protection against fire and carbon monoxide threats.

The MICN102 is a dual-sensor alarm, combining both smoke and carbon monoxide detection in a single unit. This compact device features an electrochemical sensor for precise CO detection, as well as an ionization smoke sensor that responds quickly to fast-flaming fires. With a loud alarm of 85 decibels, homeowners can rely on timely notifications in the event of emergencies. The MICN102 is also equipped with a test and silence button, allowing for easy routine checks and the ability to silence false alarms.

The MICN109L is an enhanced model that includes a voice alert feature. This model not only emits a loud alarm but also provides clear spoken alerts, indicating whether smoke or carbon monoxide has been detected, significantly improving user awareness and response times. With its user-friendly design, the MICN109L also has an easy-to-read display that shows the current CO levels, allowing users to stay informed about their indoor air quality.

The MICN109 shares many of the same core features found in the MICN109L, including the dual-sensor technology and 85-decibel alarm, but does not include the voice alert function. This model still offers reliable and efficient monitoring, making it an excellent choice for individuals looking for solid protection without additional features.

Lastly, the MICN102L combines the effective detection capabilities of the MICN102 with voice alerts similar to those in the MICN109L. This model is particularly beneficial for larger households or spaces where quick identification of the type of threat may be crucial. Features such as battery backup ensure continuous protection even during power outages, while the easy-to-install design allows for swift setup.

Across all models, Universal Security Instruments emphasizes user-friendly operation, reliability, and effective detection, providing peace of mind for families and individuals alike. With their modern design and advanced safety features, these units stand out as trusted guardians against fire and carbon monoxide hazards, reflecting Universal Security Instruments’ commitment to quality and safety.
Top Page Image Contents