Linear AE1000Plus installation instructions Recessed Mounting, Pedestal Mounting

Page 9

Entry System Mounting (Continued)

Recessed Mounting

The cabinet can be mounted recessed using the accessory trim-ring (P/N ACP00909). The trim-ring mounts in the wall and the cabinet attaches to the trim-ring.

1.Identify the location of any studs in the wall.

2.Cut a 16-1/4” high by 13-1/4” wide rectangular hole between studs at the mounting location.

3.Install any additional mounting material required to provide surfaces inside the wall 13-1/4” apart for attaching the trim-ring.

4.Place the trim-ring in the wall hole. Check for level, then attach the trim-ring with up to six screws into the side tabs.

5.Drill the cabinet’s four self-drill mounting holes the appropriate size for the hardware.

6.Attach the cabinet to the trim-ring using self-tapping screws.

7.After routing the wiring into the cabinet, replace the circuit board mounting plate and plug in the wiring connectors. Be sure to replace the green ground wire.

1

DETERMINE LOCATION FOR

2 MARK HOLE LOCATION

 

THE 13-¼" x 16-¼" MOUNTING HOLE

 

 

RECESSED

 

 

MOUNTING

 

16-¼"

 

 

13-¼"

 

3

CUT MOUNTING HOLE

4 INSTALL ANY SHIMS TO

 

 

ALLOW MOUNTING AND

 

 

ATTACH THE TRIM-RING

 

 

WITH UP TO 6 SCREWS

DRILL 3/16" HOLES IN

5THE CABINET AT THE

PRE-MARKED LOCATIONS

ATTACH THE CABINET TO

6THE TRIM-RING WITH SELF-TAPING SCREWS

Pedestal Mounting

The cabinet can be mounted on a gooseneck pedestal. Linear manufacturers two pedestals: Model GNC-1 is for surface mounting with concrete fasteners, Model GNB-1 is for burial mounting. When mounting to a pedestal, use the cabinet reinforcing plate to stiffen the cabinet.

1.Install the pedestal at the desired location.

2.Place the reinforcing plate inside the cabinet.

3.Use security hardware to attach the cabinet and reinforcing plate to the pedestal.

4.After routing the wiring into the cabinet, replace the circuit board mounting plate and plug in the wiring connectors. Be sure to replace the green ground wire

ALIGN THE REINFORCING PLATE

ON THE INSIDE OF THE CABINET

PEDESTAL

MOUNTING

PEDESTAL

USE SECURITY HARDWARE

TO ATTACH THE PLATE AND

CABINET TO THE PEDESTAL

9

Image 9
Contents AE1000Plus Programming and Cardholder Maintenance ContentsIntroduction OperationHardware Features Feature OverviewSoftware Highlights Wiegand Accessories Accessory Overview Pbus AccessoriesComponent Locations Installation NoteThis Wiring Example Shows Wiring DiagramImportant Mounting Requirements Mounting Preparation Entry System MountingSurface Mounting Surface MountingPedestal Mounting Recessed MountingDoor or Pedestrian Gate Control Relay Output WiringGate Control Request-to-Exit InputsPower Wiring Power, Battery, & Ground WiringBackup Battery / Uninterruptable Power Supply RS-232 PortImportant Telephone Wiring Tips Telephone WiringTypical Telephone Wiring Optional Radio AntennaPostal Lock Installation Camera InstallationOptional Postal Lock Wiegand Accessories Pbus AccessoriesRoute cable from the AE1000Plus to the accessory Wiegand TerminalsNetwork Configurations for Axnet Programming Optional Network ConnectionNetwork Configuration for AccessBase2000 Programming Optional Network ConnectionsNetwork RS-485 Network Wiring Network Wiring with HubNetwork Daisy-chain Wiring System Diagnostics System AdjustmentsDisplay shows the current network node number setting Refer to the following steps to change the system settingsInternal Controls On-board PushbuttonsRequesting Access with a Wireless Transmitter Requesting Access with an Entry CodeRequesting Access with a Visitor Call AE1000Plus OperationSpecifications Dimension Drawing16-1/4 18-3/8Troubleshooting FCC Notice Linear Limited WarrantyCopyright 2008 Linear LLC
Related manuals
Manual 12 pages 25.92 Kb

AE1000Plus specifications

The Linear AE1000Plus is a sophisticated access control and security system designed to meet the unique needs of residential and commercial environments. This advanced model is part of Linear’s commitment to providing reliable and efficient security solutions. It offers enhanced features, cutting-edge technologies, and exceptional characteristics that set it apart in the market.

One of the standout features of the AE1000Plus is its versatility in handling various access control modes. It supports access via key fobs, keypads, and biometric scanners, allowing for seamless integration with existing systems. This flexibility ensures that users can select the most appropriate method for their security requirements, enhancing convenience without compromising safety.

The AE1000Plus incorporates advanced wireless technology that facilitates easier installation and use. This wireless capability eliminates the need for extensive wiring, significantly reducing installation time and costs. Additionally, the system can communicate with Linear's extensive range of peripherals, including security cameras and alarm systems, providing a comprehensive security solution.

Another notable characteristic is its robust capacity for managing multiple users. The AE1000Plus can store a substantial number of user codes and fobs, making it ideal for larger facilities or properties with frequent visitor access. This feature empowers administrators with control over who can access specific areas while maintaining an audit trail of entries and exits.

The system is built with a user-friendly interface, ensuring ease of operation for both administrators and users. Programming and configuration can be streamlined through intuitive menus, while easily accessible manuals provide guidance for troubleshooting and adjustments. User experience is further enhanced by the AE1000Plus's compatibility with mobile applications, able to manage access remotely.

Security is paramount, and the AE1000Plus excels in implementing high-security standards. It employs encryption protocols that protect transmitted data from unauthorized access, ensuring the integrity and confidentiality of user information. The system is also designed to perform reliably in various environmental conditions, making it suitable for outdoor applications.

In summary, the Linear AE1000Plus combines versatility, advanced technology, and user-oriented design to create a leading access control solution. Its array of features ensures robust security while offering the flexibility to meet the demands of various settings, confirming Linear's position as a trusted name in the security industry. Whether for residential or commercial use, the AE1000Plus stands out as a reliable choice for modern security needs.