Firstech, LLC. Technical Data (CM3000)
Pin #6: Yellow- This wire is the
be programmed for a timed pulse or latch. Please note: Timed pulse durations can only be programmed with the CompuProgrammer.
Pin #7: Yellow/White- This wire is the
It can be programmed for a timed pulse or latch. Please note: Timed pulse durations can only be programmed with the CompuProgrammer.
Pin #8: No Connection
Connector #6:
This is the plug for the Status LED.
Connector #7:
This is the plug for the Shock Sensor
Connector #8:
Pin #1: This wire is used as an optional sensor input. It is internally connected to stage #1, also known as the warn away input.
Pin #2: This wire is used as an optional sensor input. It is internally connected to stage #2, also known as the instant trigger input.
Connector #9:
This is the plug for the RPS (Remote Paging System).
Connector #10:
This is the plug in for the temperature sensor input, which will be released soon. This sensor will monitor the internal temperature of the vehicle and be programmable for timed engine starts.
Connector #11:
This is the plug for the antenna cable.
7