First Alert Comprehensive FA1600C Programming and User Manual for Home Security Systems

Security Codes & Authority Levels (cont’d)

To Exit User Edit Mode

You can exit any of the user edit modes described on the following pages at any time by doing the following:

1. Press either

✴

or

#

, or don't press any key for 10 seconds.

2. System returns to normal mode.

To Add a User

IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones).

CODE

1. Enter Master or Manager code and press the

8

key.

2.Enter the new user's 3-digit User Number (002-150).

3.Enter 4-digit security code for that user. The following prompts will appear.

ADD NEW USER? 0 = NO , 1 = YES

Enter 1 to add a new user code. Entering 0 will change the existing user's code to the code entered in step 3. See Changing A User's Code section.

USER NUMBER = 003

ENTER AUTH. LEVEL

ACCESS GROUP? ENTER 0-8

Enter the authority level, 1-6, for this user within this partition.

1=master	2=manager	3=operator A
4=operator B	5=operator C	6=duress code

If access schedules have been programmed, this prompt appears. Enter the user's access group number (1-8) if this user should have limited access to the system. Enter 0 if no access group should be assigned.

– 18 –

Technical Manuals Online! - http://www.tech-man.com