First Alert fa1600c, FA1600C/CA/CB technical manual Alarms, Memory of Alarm, Speed Key Macros

Page 6

System Overview (cont’d)

The following table lists the four different arming modes and the results of each.

 

 

Features For Each Arming Mode

Arming

Exit

 

Entry

Perimeter

Interior

Mode

Delay

 

Delay

Armed

Armed

AWAY

Yes

 

Yes

Yes

Yes

STAY

Yes

 

Yes

Yes

No

INSTANT

Yes

 

No

Yes

No

MAXIMUM

Yes

 

No

Yes

Yes

Alarms

When an alarm occurs, both the keypad and external sounders will sound, and the keypad will display the zone(s) causing the alarm. If your system is connected to a central monitoring station, an alarm message will also be sent. To stop the alarm sounding, simply disarm the system.

Memory of Alarm

When an alarm condition occurs, the keypad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It remains displayed until it is cleared by disarming the system (see DISARMING THE SYSTEM section).

Speed Key (Macros)

The system can store a string of up to 32 keystrokes, which can be activated anytime by simply pressing the “A, B, C, or D” keys. This feature can be used to make it easy to perform a complicated procedure (such as going to another partition to bypass a zone), or it can be used to simplify an everyday, repeated procedure. Refer to the SPEED KEY section for procedures for using this feature.

– 6 –

Technical Manuals Online! - http://www.tech-man.com

Image 6
Contents $&&$&% Table of Contents Trouble Conditions System Overview GeneralPartitioned System Fire Protection System Overview cont’dZones Burglary ProtectionAlarms Memory of AlarmSpeed Key Macros Using Schedules Device TimersTo Access Another Partition Goto Command Master Keypad Operation Self-Help FeaturePhone Access & Voice Response Capability To view the abbreviated instructionsSystem Overview cont’d About The Keypads Alpha KeypadFunctions Of The Keypad Functions Of The Keypad cont’d Functions Of The Keypad cont’d Entry/Exit Delays General InformationSecurity Codes & Authority Levels Duress CodeQuick Arming Security Codes & Authority Levels cont’d Authority LevelsGeneral Rules on Authority Levels and Changes To view your authority level and system capabilitiesTo Exit User Edit Mode To Add a UserRF Button ? Limited Use User#84 Command To Change a Users CodeTo Delete a User Global Arming Accessing Other PartitionsTo Access Another Partition To Goto another partitionAccessing Other Partitions cont’d Fault 002 Loading Dock Window Common Lobby Operation How User Codes Affect the Common Lobby Codes with Global ArmingCodes with Non-Global Arming Other Methods of Arming/Disarming Typical fault display Using Ready KeyTo show faulted zones Checking For Open ZonesDisplaying All Zone Descriptors Using Bypass Key Bypassing Protection ZonesTo bypass zones, the system must be disarmed first Quick Bypass To use the Quick Bypass featureBypassing Protection Zones cont’d Displaying Bypassed ZonesUsing the 3 Stay key Arming Perimeter OnlyWith Entry Delay OFF Using the 7 Instant KeyUsing the 2 Away Key Arming All ProtectionUsing the 4 Maximum Key Disarming And Silencing Alarms Using the 1 OFF KeyTo disarm the system and silence burglary or fire alarms Using The Keyswitch ArmingDisarming Chime Mode Using KeyViewing Central Station Messages Using Panic Keys Panic KeysSpeed Key Macros DefiningSpeed Key Macros cont’d ExecutingAccess Door Control Using #70 Relay Menu Mode To activate relays using a telephone and 4285 or 4286 VIPUsing #70 Relay Menu Mode cont’d To Exit Enter 00 NOWTo delay the closing time Using SchedulesDelaying the Closing Time Temporary Open/Close SchedulesUsing Schedules cont’d Programming Temporary SchedulesTo program temporary schedules Using Schedules cont’d Days ? Mtwtfss HIT 0-7 X Programming Device Timers To enter the device timer menu modeProgramming Device Timers cont’d DAYS? Mtwtfss HIT 0-7 X Permanent ? Event Log Procedures To Display The Event LogSelect the partition Event Logging Procedures To Exit the Event LogTesting The System Using the 5 Test KeyTesting The System cont’d Testing Your SystemFire Alarm System Case Of Fire AlarmSilencing a Fire Alarm Fire Alarm System cont’d Fire Display LockFire Drill Test Code + # + Fire Alarm System cont’d Trouble Conditions Typical Trouble DisplaysCall for Service Immediately Trouble Conditions cont’dPower Failure Servicing InformationRecommendations For Proper Protection Recommendations For Smoke And Heat DetectorsRecommendations For Proper Protection cont’d Addition, we recommend the followingRecommendations For Proper Intrusion Protection Emergency Evacuation Replacing Batteries in Wireless Sensors Maintaining Your SystemTaking Care of Your System Silencing Low Battery Warning Tones at the Keypad Maintaining Your System cont’dRoutine Care Function Procedure Comments Quick Guide To System FunctionsQuick Guide To System Functions cont’d Summary Of Audible Notification Alpha Display KeypadsGlossary Federal Communications Commission FCC Part 15 Statement Federal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Index AwayLsens ¬19¢Ll