First Alert FA130CP manual =231==7

		+639478%68291&)6718;8*7
	6FKHGXOLQJ￿￿FRQWLQXHG￿
5.	For event number “02,” enter the access group
		,,￿11%1		￿￿￿￿￿￿￿
	AM = 0; PM = 1
	number. Otherwise, this prompt is skipped.
	Press [∗] to continue to the “Start” prompt below.				<
7.	Enter the event’s start time and days of week.	7834		718;8*7
	Hour = 00-12; minute = 00-59
	Days = Position the cursor under the desired days
		6)4)%8348-32
	using the [∗] key to move forward, then press “1” to
	select the day.
	Press [∗] to continue.
8.	Enter the event’s stop time, AM/PM and days of
		,,￿11%1		￿￿￿￿￿￿￿
	week.
	Refer to step 7 for available entries.
	Press [∗] to continue.
9.	Enter the desired repeat option.
					<
	0 = no repeat	6%	-
	1 = repeat schedule weekly	￿￿￿
	2 = repeat schedule biweekly (every other week)
	3 = repeat schedule every third week
	4 = repeat schedule every fourth week
	e.g., To make a schedule that happens everyday you
	would select all days with a repeat count of 1. To
	make a schedule that runs for one week then stops,
	select everyday with a repeat count of 0.
10.	Select the randomize option, if desired.
	0 = no; 1 = yes	￿=2(31￿==7>)			<
	If selected, the schedule times will vary within 60
	minutes of the “hour” time. For example, if a
	schedule is set to start at 6:15pm, it will do so the
	first time 6:15pm arrives, but on subsequent days it
	will start anytime between 6:00 and 6:59 p.m.
	Press [∗] to return to first prompt, then enter 00 to
	quit.

– 33 –