First Alert FA130CP manual 0DQXDO3DJLQJ, DWFK.H\3DJLQJ

3DJLQJ￿)HDWXUH

0DQXDO￿3DJLQJ

Your system may be set up so you can manually send a message to a pager.

•Your installer programs the paging function key and the pager phone number.

• Pressing the paging keys sends the message		to the pager.
	9 9 9 – 9 9 9 9

•This message could mean “call home”, “call your office”, or any other prearranged meaning.

•See the Paging chart at the back of this manual for details of the paging setup for your system.

1.Hold pager key 2 seconds.

Press and hold the programmed Paging Key for at least 2 seconds (wait for beep).

2.The recipient, on seeing the 999–9999 message, will understand the prearranged meaning of this signal.

/DWFK￿.H\￿3DJLQJ

Alpha6)%(=-7%61)(Display:83%61

￿￿￿￿￿￿￿￿Fixed-Word Display: READY

Pager Display

You can program a schedule that causes a pager report to be sent if the system is not DISARMED by the scheduled time (see Scheduling section, event “03”). For example, a working parent might want a message to be sent to a pager if their child did not arrive home from school and disarm the system by a certain time.

If programmed, the message that is sent is:

7 7 7 – 7 7 7 7

.

– 29 –